Losing or needing to replace your key fob for your 1995 Chevy Tahoe can be a hassle, but programming a new one doesn’t have to be. Fortunately, the 1995 Chevy Tahoe, like many General Motors vehicles of that era, features onboard programming, meaning you can easily program a new key fob yourself without needing to visit a dealership or a professional locksmith. This guide will walk you through the process of programming a new key fob for your 1995 Chevy Tahoe, ensuring you regain the convenience of keyless entry quickly and efficiently.
Understanding Your 1995 Chevy Tahoe Key Fob Remote
The remote designed for your 1995 Chevy Tahoe and other GM vehicles of the time was originally manufactured with various logos and part numbers, all of which were interchangeable. GM later streamlined this by releasing a universal, non-logo remote that replaced all previous versions. These remotes typically operate on the FCC IDs ABO0103T or ABO0104T. If you’re looking for a replacement, the most current GM part number is 15725423. You might also find these superceded part numbers associated with the same compatible remote: 15692636, 15955515, 15955516, 25609144, 25555951, 15692336, 10239647, 25559364, 25609144, 15657587, 15955702, and 15731442. Rest assured, whether you find a remote with an older part number or the latest one, they are all designed to work with your 1995 Chevy Tahoe’s keyless entry system.
Programming Your 1995 Chevy Tahoe Key Fob: Step-by-Step Instructions
Before you begin, it’s crucial to have all the key fobs you intend to use with your 1995 Chevy Tahoe present. The programming process will erase all previously programmed remotes, so you’ll need to program all of them in one session.
Here’s how to program your 1995 Chevy Tahoe Key Fob:
-
Prepare Your Vehicle: Begin by inserting your key into the ignition. Ensure the ignition is in the OFF position. Do not start the engine.
-
Locate the Data Link Connector (DLC): The DLC is typically located underneath the driver’s side dashboard. You’ll need to find this connector to initiate the programming sequence.
-
Identify Terminals 4 and 8: Refer to the diagrams below to help you identify terminals 4 and 8 on your DLC. These connectors are usually tapered, and you’ll be working with the wider row of cavities, typically numbered 1 through 8. It’s essential to correctly identify terminals 4 and 8 for the programming to work.
Image alt text: Diagram illustrating the Data Link Connector (DLC) layout for 1995 Chevy Tahoe key fob programming, highlighting terminal positions.
-
Connect Terminals 4 and 8: Using a suitable jumper wire, connect terminal 8 to terminal 4 of the DLC. Keep the jumper wire connected throughout the entire programming procedure. Once connected, your Chevy Tahoe should respond by cycling the door locks (locking then unlocking) to indicate that it has entered programming mode. If the locks do not cycle, double-check your connection and the terminal numbers.
-
Program the First Key Fob: Take your first key fob for your 1995 Chevy Tahoe and press and hold both the LOCK and UNLOCK buttons simultaneously. Hold them down for approximately 30 seconds. After about 30 seconds, the vehicle should respond again by cycling the door locks (locking then unlocking). Release the buttons on the key fob.
-
Program Additional Key Fobs (if applicable): Within one minute of completing step 5, repeat the same process (step 4) for any additional key fobs you wish to program. Remember to program all fobs you want to use at this time.
-
Exit Programming Mode: Once you have programmed all your desired key fobs, remove the jumper wire from the DLC, disconnecting terminals 8 and 4.
-
Test Your Key Fobs: Finally, test each key fob to ensure it is functioning correctly with your 1995 Chevy Tahoe’s keyless entry system. Try locking and unlocking the doors, and if your model is equipped, test the panic button and any other functions your key fob might have.
Image alt text: Detailed view of the Data Link Connector (DLC) terminals used for programming a 1995 Chevy Tahoe key fob, emphasizing terminals 4 and 8.
Vehicles Compatible with this Remote
This particular key fob remote is compatible with a range of GM vehicles equipped with factory keyless entry systems from the early to mid-1990s. Besides the 1995-1996 Chevrolet Tahoe, here is a more comprehensive list of vehicles that can utilize this remote:
- Cadillac DeVille (1991-1993)
- Cadillac Fleetwood (1992)
- Chevrolet Astro (1995-1996)
- Chevrolet Blazer (1993-1996)
- Chevrolet C1500 Suburban (1995-1996)
- Chevrolet C2500 Suburban (1995-1996)
- Chevrolet Camaro (1994-1995)
- Chevrolet Caprice (1994-1996)
- Chevrolet K1500 Suburban (1995-1996)
- Chevrolet K2500 Suburban (1995-1996)
- Chevrolet Suburban (1995-1996)
- Chevrolet Tahoe (1995-1996)
- GMC C1500 Suburban (1995-1996)
- GMC C2500 Suburban (1995-1996)
- GMC Jimmy (1995-1996)
- GMC K1500 Suburban (1995-1996)
- GMC K2500 Suburban (1995-1996)
- GMC Safari (1995-1996)
- GMC Yukon (1995-1996)
- Oldsmobile Bravada (1991-1996)
- Oldsmobile Custom Cruiser (1993-1996)
By following these steps, you can easily program a new key fob for your 1995 Chevy Tahoe and regain the convenience of remote keyless entry. This do-it-yourself approach saves you time and money, getting you back on the road with full functionality of your vehicle’s remote system.
