Are you looking to program a new key fob for your 1998 Nissan Maxima? Or perhaps you need to replace a lost or damaged remote? As a content creator for keyfobprog.com and an automotive repair specialist, I’m here to guide you through the process for the 1998 Nissan Maxima Key Fob, also compatible with other Nissan and Infiniti models from the late 90s. This guide will provide you with all the essential information you need to understand your key fob and program it yourself.
Understanding Your 1998 Nissan Maxima Key Fob
The factory keyless entry remote for the 1995-1999 Nissan Maxima and 1996-1999 Infiniti I30 comes with an FCC ID of A269ZUA078. This 4-button remote operates at a frequency of 434 MHz. You might find either Nissan part number 28268-40U20 or Infiniti part number 28268-40U15 associated with this remote. Interestingly, despite the different brand names molded on the remote’s front, these part numbers refer to the exact same internal components and signal transmission. This means they are completely interchangeable, offering flexibility when sourcing a replacement.
Is Your Vehicle Equipped with Factory Keyless Entry?
Before proceeding with programming, it’s crucial to confirm your vehicle is equipped with the factory keyless entry system. While the Infiniti I30 included this feature as standard, the Nissan Maxima trim level determines its presence. The top-tier Maxima GLE models always came with factory keyless entry as standard. The mid-range Maxima SE models often included it, but it wasn’t guaranteed. For the base GXE trim, factory keyless entry was less common.
If you own a Maxima SE or GXE and are unsure, there are a couple of ways to check. The most definitive method is to contact your local Nissan dealership’s parts department. Provide them with your Vehicle Identification Number (VIN), and they can quickly tell you if your car was originally equipped with factory keyless entry. Alternatively, you can explore our blog at keyfobprog.com for a detailed keyless entry verification procedure, which may offer a more convenient at-home check.
Step-by-Step Programming Guide for Your 1998 Nissan Maxima Key Fob
The good news is that programming the 1998 Nissan Maxima key fob is designed to be user-friendly. The vehicle’s system is onboard programmable, meaning you can complete the process yourself without specialized tools. However, please note that entering programming mode will erase all previously programmed remotes. Therefore, you must program all remotes you intend to use, including any existing ones, during this session. Ensure you have all remotes at hand and separate your ignition key from your keychain for easier handling.
Here’s the programming procedure:
- Begin with your ignition key in your right hand and the key fob in your left. Keep any additional remotes within easy reach. Insert the key into the ignition.
- Perform the following sequence within 5 seconds:
a. Turn the ignition to the ON position (dashboard lights illuminate, engine not started).
b. Press and release the UNLOCK button on the remote.
c. Turn the ignition to the LOCK position (key insertion position). Leave the key in the ignition.
d. Turn the ignition to the ON position again.
e. Press and release the UNLOCK button on the remote again.
f. Turn the ignition back to the LOCK position. Leave the key in the ignition.
g. Turn the ignition to the ON position once more.
h. Press and release the UNLOCK button on the remote for the third time.
i. Turn the ignition back to the LOCK position. Leave the key in the ignition. - Within 5 seconds, turn the ignition to the ON position.
- Press and release the UNLOCK button on the same remote. The power door locks should cycle (lock then unlock) to confirm the system has entered programming mode.
- Within 10 seconds, press and release the UNLOCK button on the same remote again. The door locks will cycle once more to confirm successful programming of this remote.
- If you have additional remotes to program, repeat step 5 for each one within 10 seconds.
- Finally, turn the ignition back to the LOCK position and remove the key to exit programming mode.
Compatible Vehicles
This key fob, FCC ID A269ZUA078, is compatible with the following vehicles when equipped with the factory keyless entry system:
- Infiniti I30 (1996-1999)
- Nissan Maxima (1995-1999)
Should you encounter any difficulties during the programming process or have further questions, remember that keyfobprog.com offers free phone tech support to assist you. We also test every remote before shipping to ensure it arrives in perfect working condition, giving you peace of mind.
