Lost your 1999 Dodge Durango Key Fob or need to program a new replacement? You’ve come to the right place. Programming your key fob for your 1999 Dodge Durango can often be done right at home, saving you time and money compared to dealership programming. This guide will walk you through the steps to program your key fob, ensuring you regain the convenience of remote access to your vehicle.
What You Need Before You Start
Before you begin the programming process for your 1999 Dodge Durango key fob, it’s crucial to ensure you meet a critical requirement:
- A Working Remote: This programming method requires you to have at least one already programmed and functioning key fob. If you do not have a working remote, these DIY instructions will not work. In such cases, you will need to visit a qualified locksmith or your Dodge dealership for professional programming services that utilize specialized equipment.
Step-by-Step Programming Instructions
Assuming you have a working remote, follow these steps carefully to program your new 1999 Dodge Durango key fob:
-
Turn the Ignition to Run: Insert your key into the ignition and turn it to the “run” position. This is the position just before you would crank the engine to start the car. Do not start the engine.
-
Press and Hold UNLOCK on Working Remote: Take your working remote and press and hold the “UNLOCK” button. Maintain pressure on the unlock button for a duration of 4 to 10 seconds.
-
Press PANIC While Holding UNLOCK: While still holding down the “UNLOCK” button, press and release the “PANIC” button for approximately one second. Release both the “UNLOCK” and “PANIC” buttons simultaneously.
-
Listen for the Chime: Within about 3 seconds after releasing the buttons, you should hear a chime sound. This chime is your signal that the vehicle has successfully entered remote programming mode and is ready to learn new key fobs.
-
Program Remotes: Within 30 seconds of hearing the chime, take each remote you wish to program (both new and any existing remotes you want to continue using) and press any button on each remote. After pressing a button on each remote, you should hear another chime indicating that particular remote has been successfully programmed. Make sure to program all remotes you intend to use at this time, as programming new ones may erase previously programmed remotes if they are not included in this step.
-
Turn Ignition OFF: Once you have programmed all desired remotes, turn the ignition key to the “OFF” position and remove the key from the ignition.
-
Test Your Remotes: Thoroughly test all of your newly programmed key fobs to ensure they are working correctly. Check the lock, unlock, and panic functions to confirm proper programming.
Troubleshooting Tips
If you encounter difficulties programming your 1999 Dodge Durango key fob, consider these points:
- Working Remote is Essential: Double-check that you are using a working remote for the initial steps. This method will not work without one.
- Timing: Pay close attention to the timing in the instructions, particularly the 4 to 10 second window for holding the “UNLOCK” button.
- Professional Help: If you are still unable to program your remote, or if you did not have a working remote to begin with, your best option is to seek professional help. A locksmith specializing in automotive keys or your local Dodge dealership will have the necessary tools and expertise to program your key fob for you.
Need a replacement key fob for your 1999 Dodge Durango? Visit Keylessentryremotefob.com for a wide selection of key fobs and remotes. You can also find local professional installers in your area on our website if you prefer to have your key fob programmed by an expert.
