Is your 1999 Honda Accord Key Fob not working as it should? Perhaps you’ve replaced the battery, or maybe you’ve just purchased a new key fob. Whatever the reason, programming your key fob is a straightforward process you can accomplish right at home. This guide will walk you through each step to get your 1999 Honda Accord key fob programmed quickly and efficiently.
Step-by-Step Programming Instructions
Before you begin, it’s important to understand that initiating the programming sequence will erase all previously programmed remotes. Therefore, you’ll need to reprogram all of your key fobs during this process. Ensure you have all remotes you intend to use ready before starting. Also, each step must be completed within 5 seconds of the last to prevent the system from exiting programming mode.
Here’s how to program your 1999 Honda Accord key fob:
-
Turn the ignition to the ON (II) position. This is the position right before you would start the engine.
-
Press the LOCK or UNLOCK button on one of your key fobs. It doesn’t matter if the remote is currently programmed or not for this step.
-
Turn the ignition to the LOCK (0) position. This is the position where the car is completely off.
-
Repeat steps 1, 2, and 3 two more times. Make sure you use the same key fob button (LOCK or UNLOCK) each time you press it in step 2.
-
Turn the ignition switch back to the ON (II) position.
-
Press the LOCK or UNLOCK button again on the same key fob you’ve been using. If you’ve successfully entered programming mode, the power door locks should cycle (lock and then unlock) automatically. This confirms you are ready to program your remotes.
-
Program each remote: For each key fob you want to program, press the LOCK or UNLOCK button. After pressing a button on each remote, the door locks should cycle again, indicating that the system has accepted the signal from that remote.
-
Turn the ignition switch to the LOCK (0) position. This will exit the programming mode.
-
Test your remotes. Press the LOCK and UNLOCK buttons on each programmed key fob to ensure they are working correctly.
If you encounter any difficulties programming your 1999 Honda Accord key fob, or if you need to purchase a replacement key fob, visit Keylessentryremotefob.com for a wide selection of key fobs and expert assistance. You can find the specific KOBUTAH2T part number here if you need to order a new fob.
