Are you looking to program or reprogram your 1999 Honda Civic Key Fob remote? Whether you’ve purchased a new key fob replacement or need to resync your existing remote, this comprehensive guide provides you with easy-to-follow programming instructions. At Keylessentryremotefob.com, we understand the importance of a functioning key fob for your vehicle’s security and convenience. This guide will walk you through each step to get your 1999 Honda Civic key fob programmed quickly and efficiently.
Programming Your 1999 Honda Civic Key Fob – Step-by-Step Guide
Before you begin the programming process for your 1999 Honda Civic key fob, it’s crucial to understand a few important notes. Entering programming mode will erase all previously programmed remotes. Therefore, you will need to reprogram all remotes you intend to use with your vehicle during this session. Ensure you have all key fobs you wish to program ready before starting. Also, it’s important to perform the initial steps swiftly, as indicated in the instructions below.
Here are the programming steps for your 1999 Honda Civic key fob:
-
Ensure all doors of your 1999 Honda Civic are unlocked before you begin the programming sequence.
-
Insert your key into the ignition and turn it to the ON position (position II). This is the position just before you would start the engine.
-
Immediately after turning the ignition to the ON position, press the LOCK or UNLOCK button on your key fob remote.
-
Turn the ignition key to the ACCESSORY (position I) or LOCK (position 0). This is turning the key back one position from ON, or all the way back to the starting position.
-
Turn the ignition back to the ON position (II) again.
-
Press the LOCK or UNLOCK button on the same remote once more.
-
Turn the ignition to the ACCESSORY (I) or LOCK (0) position.
-
Turn the ignition to the ON position (II) again.
-
Press the LOCK or UNLOCK button on the same remote for another time.
-
Turn the ignition to the ACCESSORY (I) or LOCK (0) position.
-
Turn the ignition to the ON position (II) for the final time in this sequence.
-
Press the LOCK or UNLOCK button on the same remote one last time. At this point, if you have successfully entered programming mode, the door locks should cycle (lock and then unlock). This indicates that your 1999 Honda Civic is now in programming mode and ready to accept key fob codes.
-
For each key fob you want to program (up to three remotes), press the LOCK button on the remote. Each time you press the LOCK button on a remote that is successfully programmed, the door locks should cycle again, confirming acceptance of that remote’s signal.
-
Once you have programmed all desired key fobs, turn the ignition to the LOCK (0) position to exit the key fob programming mode.
-
Test each programmed remote to ensure they are working correctly by pressing the lock and unlock buttons and verifying the doors respond accordingly.
If you encounter any difficulties programming your 1999 Honda Civic key fob, or if you prefer professional assistance, you can use the search box on our website Keylessentryremotefob.com to locate a certified key fob installer in your local area. Simply enter your city or zip code to find help nearby. You can also order a replacement key fob for your 1999 Honda Civic directly from our website using part number A269ZUA106.
