Is your 1999 Honda Civic key fob no longer working, or did you recently replace it and need to get it programmed? Don’t worry, programming your key fob for your 1999 Honda Civic can be a straightforward process you can do yourself. This guide will walk you through each step to get your remote working again so you can conveniently lock and unlock your doors at the press of a button.
Before you begin, it’s important to understand that initiating the programming mode will erase all previously programmed remotes. Therefore, you’ll need to reprogram all the remotes you intend to use with your 1999 Honda Civic during this session. Make sure you have all your key fobs ready before starting. Also, ensure all doors are unlocked before beginning the process.
Here’s how to program your 1999 Honda Civic key fob:
-
Turn the ignition key to the ON position (II). This is the position right before you would start the engine.
-
Press the LOCK or UNLOCK button on the key fob you are programming.
-
Turn the ignition key to the ACCESSORY (I) or LOCK (0) position. This is turning the key back one click from ON or all the way back to the starting position.
-
Turn the ignition key back to the ON (II) position again.
-
Press the LOCK or UNLOCK button on the same key fob once more.
-
Turn the ignition key to the ACCESSORY (I) or LOCK (0) position again.
-
Turn the ignition key back to the ON (II) position again.
-
Press the LOCK or UNLOCK button on the same key fob for another time.
-
Turn the ignition key to the ACCESSORY (I) or LOCK (0) position once more.
-
Turn the ignition key back to the ON (II) position again.
-
Press the LOCK or UNLOCK button on the same key fob for the final time in this sequence.
-
At this point, if you’ve successfully entered programming mode, the door locks should cycle (lock then unlock). This indicates that your 1999 Honda Civic is now ready to learn the key fob signals. It’s crucial to perform steps 1 through 12 within 5 seconds of each other to successfully enter programming mode.
-
Now, for each key fob you want to program (up to three), press the LOCK button on the remote. Each time you press the LOCK button on a key fob that is successfully programmed, the door locks should cycle again, confirming that the remote’s signal has been accepted and programmed. Make sure to program each remote within 10 seconds of each other.
-
Once you have programmed all desired key fobs, turn the ignition key to the LOCK (0) position to exit the programming mode.
-
Test all programmed remotes to ensure they are working correctly by pressing the LOCK and UNLOCK buttons and verifying the doors respond accordingly.
If you encounter difficulties programming your key fob, double-check that you are performing each step within the time constraints. If you prefer professional assistance, you can locate a local key fob installer by entering your city or zip code in a search engine to find a professional near you who can program your remote for you.
If you need to purchase a replacement key fob for your 1999 Honda Civic, or for any other vehicle, visit Keylessentryremotefob.com for a wide selection of key fobs. You can order the correct key fob part number A269ZUA106 directly from our website.
We value your feedback! Leave any comments or suggestions below to help us improve our guides and assist other Honda Civic owners. If you found this guide helpful, please share it with friends and family!
