Are you looking to program a 2000 Accord Key Fob? Perhaps you’ve purchased a new replacement or need to reprogram your existing remote. Luckily, programming your key fob for a 2000 Honda Accord can be done easily at home without any special tools. This guide will walk you through each step to get your remote working quickly.
Before you begin, gather all the key fobs you plan to use with your 2000 Honda Accord. It’s important to program all remotes at the same time because this process will erase any previously programmed remotes.
Here’s how to program your 2000 Honda Accord key fob:
-
Get inside your 2000 Honda Accord and close all the doors. Make sure all doors are fully shut for the programming sequence to work correctly.
-
Timing is crucial for this process. You will have only 5 seconds to complete each of the following steps. If you exceed the 5-second window, you’ll need to start the entire procedure again from the beginning. Don’t worry if you don’t get it right on the first try; you can repeat these steps as many times as needed.
-
Now, you will repeat a specific sequence three times using the same key fob each time. It doesn’t matter if the remote is already programmed or brand new for this step.
A. Turn the ignition key to the ON position (II). This is the position right before you would start the engine, where the dashboard lights illuminate. Do not start the engine.
B. Press the LOCK button on the key fob you are programming.
C. Turn the ignition key back to the OFF position (I). This is the position where you can remove your key from the ignition.Repeat steps A, B, and C exactly three times.
-
After the third repetition, turn the ignition key to the ON position (II) one last time.
-
Using the same key fob from step 3, press the LOCK button again. If you’ve successfully entered programming mode, you will see the door locks cycle – they will lock and then unlock automatically. This lock cycling is your confirmation that the system is ready to program your remote.
-
Immediately after the door locks cycle, press the LOCK button on the same key fob once more. The door locks will cycle again to confirm that this specific remote has been successfully programmed to your 2000 Honda Accord.
-
If you have additional key fobs to program, repeat step 6 for each of them. You have a 10-second window to program each additional remote. Each time you successfully program a key fob, the door locks will cycle to confirm.
-
Finally, turn the ignition key to the OFF position (I). This will exit the programming mode.
Test all of your programmed key fobs to ensure they are working correctly with your 2000 Honda Accord. You should now be able to lock and unlock your doors remotely.
If you encounter any difficulties programming your 2000 Accord key fob or prefer to have a professional handle it, you can always find a trusted automotive locksmith in your area. They have the expertise and tools to program key fobs for you efficiently.
