Is your 2000 Chevy Blazer key fob no longer working, or did you recently purchase a new remote and need to get it programmed? You’ve come to the right place! As your trusted automotive experts at keyfobprog.com, we provide straightforward, easy-to-follow instructions to get your key fob programmed and working again in no time. Forget expensive dealership programming fees; with these steps, you can program your 2000 Chevy Blazer key fob yourself from the comfort of your own driveway.
Step-by-Step Guide to Program Your 2000 Chevy Blazer Key Fob
Programming your 2000 Chevy Blazer key fob is a simple process that you can accomplish in just a few minutes. Follow these steps carefully to ensure successful programming:
-
Prepare Your Vehicle: Begin by closing all the doors on your 2000 Chevrolet Blazer. Insert your key into the ignition, but do not turn the ignition on yet.
-
Initiate Programming Mode: Locate the UNLOCK button on the driver’s side door panel. Press and HOLD the UNLOCK button down. Do not release it until instructed in step 4.
-
Cycle the Ignition: While holding the UNLOCK button, quickly turn the ignition key from the OFF position to the ON position and back to OFF, twice in rapid succession. Remember, “ON” is the position just before you would start the engine, and “OFF” is the position where you can remove the key. Do not start the car.
-
Release the Unlock Button: Now, release the UNLOCK button on the door. If you have successfully entered programming mode, the door locks will cycle from LOCK to UNLOCK automatically. This lock cycling is your confirmation that the vehicle is ready to program key fobs.
- Troubleshooting: If the door locks cycle before you release the UNLOCK button, the programming sequence has failed. You will need to repeat the process from step one, ensuring you follow each step precisely. If the locks continue to cycle prematurely, double-check that you are performing each step correctly. If issues persist, there may be a malfunction in your vehicle’s keyless entry system, and you might need to seek professional assistance.
-
Program Your Key Fob: Take the first key fob you wish to program (whether it’s a new or existing remote). Simultaneously press and hold both the LOCK and UNLOCK buttons on the key fob. Continue holding both buttons until the vehicle responds by cycling the door locks again. It’s important to note that programming a new, previously unpaired remote may take longer, potentially up to 5 minutes. A remote that has been previously paired with the vehicle will typically program much faster.
-
Program Additional Remotes (Optional): If you have additional key fobs to program, repeat step 5 for each remote you want to use with your 2000 Chevy Blazer.
-
Exit Programming Mode: Turn the ignition key to the ON position. This action will exit the key fob programming mode.
-
Test Your Remotes: Programming is now complete. Remove the key from the ignition and test all programmed key fobs to ensure they are working correctly by pressing the LOCK and UNLOCK buttons to verify proper function.
If you encounter difficulties programming your 2000 Chevy Blazer key fob or prefer professional assistance, you can search for a qualified key fob installer in your area by entering your city or zip code in online search engines. However, for many 2000 Chevy Blazer owners, these straightforward steps will successfully program their key fobs, saving time and money.
