Having trouble with your 2001 Pt Cruiser Key Fob? It can be frustrating when your remote stops working. Luckily, if you already have a working remote, programming a new or replacement 2001 PT Cruiser key fob can often be done yourself without needing special tools. This guide provides two simple procedures to program your key fob, allowing you to regain control over your vehicle’s locking system quickly. However, it’s important to note that if you do not have an existing, functioning remote, you will need to visit an automotive locksmith who has diagnostic equipment to program a new one for your 2001 PT Cruiser.
Programming Procedure #1
This first method is commonly effective for 2001 PT Cruiser key fobs. Ensure you have all the remotes you intend to use with your vehicle before starting this procedure.
-
Ignition Ready: Insert your key into the ignition switch and turn it to the ON position. This is the position just before you would crank the engine to start.
-
Unlock Button Hold: On a remote that is currently working with your PT Cruiser, press and hold the UNLOCK button. Keep it pressed for a duration between 4 and 10 seconds.
-
Panic Button Press: While still holding the UNLOCK button, press the PANIC button for one second, and then release both buttons simultaneously. Listen carefully for a chime sound. This chime, which should occur within three seconds, indicates that your 2001 PT Cruiser has successfully entered the key fob programming mode.
-
Program Remote 1: Immediately after hearing the chime, press any button on the remote you used in step 3. You should hear another audible tone. This second tone confirms that the remote you just pressed has been successfully reprogrammed. It’s crucial to complete this step within 30 seconds of hearing the initial chime in step 3.
-
Program Additional Remotes: If you have more remotes to program, including any previously working remotes you want to ensure are still programmed, you must act quickly. Within 30 seconds of completing step 4, press any button on the next remote. Repeat this step for every additional remote you need to program. For each successful programming, you should hear the confirmation tone.
-
завершение Programming: Once you have programmed all your desired 2001 PT Cruiser key fobs, turn the ignition switch OFF. Now, test each remote to ensure it is working correctly and properly programmed to lock and unlock your vehicle.
Programming Procedure #2
If the first procedure did not work for your 2001 PT Cruiser key fob, try this alternative method. Again, make sure you have all remotes you wish to program ready before beginning.
-
Ignition ON: Place the key in the ignition and turn the ignition switch to the ON position, just before starting the engine.
-
Hold Unlock: Press and hold the UNLOCK button on a currently functioning remote for 4 to 10 seconds.
-
Panic Button Sequence: While continuing to hold the UNLOCK button, press the PANIC button for one second, then release both buttons at the same time. Listen for the chime, which should sound within three seconds, signaling entry into programming mode.
-
Lock and Unlock Button Sequence for Remote 1: On the same remote used in step 3, press and hold both the LOCK and UNLOCK buttons simultaneously, then release them. You should hear a tone indicating the remote was recognized. Immediately after hearing this tone, press and release the UNLOCK button on that same remote. A chime should sound, confirming that this remote has been programmed. This entire step must be completed within 30 seconds of step 3.
-
Programming Subsequent Remotes: Within 30 seconds of completing step 4, for each additional remote, press and hold the LOCK and UNLOCK buttons together, and then release. Listen for the tone indicating recognition. Once you hear the tone, press and release the UNLOCK button on that remote. Another chime will sound, confirming programming. Repeat this step for all remaining remotes, including any previously working ones.
-
Final Test: Programming is now finished. Turn the ignition off. Test all programmed remotes to verify they are working as expected with your 2001 PT Cruiser.
If neither of these procedures successfully programs your 2001 PT Cruiser key fob, or if you initially did not have a working remote, it is recommended to seek assistance from a professional automotive locksmith. They possess specialized diagnostic tools that can program your key fob even without a working existing remote.
