Lost your key fob or need to program a new one for your 2002 Nissan Xterra? Programming your key fob can be done easily at home with a few simple steps. This guide provides clear, step-by-step instructions on how to program your 2002 Nissan Xterra key fob yourself, saving you both time and the expense of dealership programming.
Programming Your 2002 Nissan Xterra Key Fob
Follow these straightforward steps to program your key fob:
Step 1: Manually Lock All Doors
Begin by getting inside your 2002 Nissan Xterra. Ensure all doors are completely closed and then lock them using the manual lock/unlock switch located on the driver’s side door. It’s important to use the physical switch and not an existing remote for this step.
Step 2: Ignition Key Cycling Procedure
This step involves cycling your ignition key. Insert your key into the ignition switch and then remove it a total of six times in rapid succession, specifically within a 10-second timeframe. Make sure each insertion and removal is a complete cycle. If performed correctly, your Xterra’s hazard lamps will flash. If the hazard lamps do not flash after six attempts, repeat the procedure, this time trying ten key cycles instead of six.
Step 3: Turn Ignition to ACC
Once the hazard lamps have flashed, re-insert the key into the ignition and turn it to the “ACC” (Accessory) position. This is the position right before starting the engine.
Step 4: Program the First Key Fob
Within 5 seconds of turning the ignition to the ACC position, take your new 2002 Nissan Xterra key fob and press the lock button once. If the programming step is successful, the hazard lamps on your Nissan Xterra will flash again to confirm.
Step 5: Program Additional Key Fobs (Optional)
If you need to program additional key fobs, including both new and any existing working remotes, you can do so now. First, use the driver’s side door lock/unlock switch to unlock and then immediately lock the doors again. Remember to use the manual switch, not a remote, for this action. Within 5 seconds after locking the doors, take the next key fob you wish to program and press the lock button on it once. The hazard lamps will flash to confirm successful programming of this additional remote. Repeat this exact process for each remaining key fob you need to program.
Step 6: Exit Programming Mode and Finalize
After you have finished programming all desired key fobs, turn the ignition switch to the “OFF” position. Then, completely remove the key from the ignition. To finalize the process, unlock all doors using the driver’s side door lock/unlock switch one last time.
Step 7: Test All Programmed Key Fobs
Finally, test each of your programmed key fobs to ensure they are all functioning correctly. Check that the lock and unlock buttons are working as expected.
Conclusion:
Congratulations! You have successfully completed the programming of your 2002 Nissan Xterra key fob. By following these detailed steps, you’ve avoided unnecessary costs and regained full remote access to your vehicle. Should you encounter any difficulties during this process, or if you prefer to have a professional handle the key fob programming, you can easily locate a qualified key fob installer in your local area by using the search tool available at keyfobprog.com.
