Understanding your 2002 Subaru Wrx Key Fob is key to utilizing its security system effectively. This article will guide you through the features of your Subaru WRX security system and how to operate it using your key fob, ensuring your vehicle is protected.
Understanding the Security System of Your 2002 Subaru WRX
The security system in your 2002 Subaru WRX is designed to deter theft and unauthorized entry. Upon detecting forced entry, the system activates both audible and visual alarms. These alarms include the car horn sounding intermittently and the parking lights flashing, drawing attention to the vehicle. Furthermore, the system immobilizes the engine by disabling the starter circuit, preventing the car from being driven.
Unauthorized entry attempts are monitored through sensors located on the doors, rear gate, and trunk lid. If any of these sensors are triggered by the opening of a door, gate, or trunk without using the key fob, the alarm system will activate. The system also incorporates an impact sensor. If this sensor detects a significant impact on the vehicle, it will also trigger the alarms and immobilize the starter.
How to Arm the Security System with Your 2002 Subaru WRX Key Fob
Arming your 2002 Subaru WRX security system using your key fob is a straightforward process:
- Remove the key from the ignition switch.
- Ensure all doors are properly closed, including the trunk lid and rear gate.
- Close all windows for optimal security.
- Lock all doors and the rear gate.
- Press the LOCK button on your 2002 Subaru WRX key fob.
Upon pressing the LOCK button, you should receive confirmation that the system is arming. The horn will chirp once, and the parking lights will flash once. The security indicator light on the dashboard should begin to blink slowly, approximately once every two seconds, indicating the system is armed and active.
If any door, rear gate, or trunk lid is not securely closed, the system will alert you. Instead of the single chirp and flash, the horn will chirp three times, the parking lights will flash three times, and the security indicator light will flash rapidly. Once the improperly closed door or trunk is secured, the system will automatically arm, the doors will lock, and the indicator light will blink slowly.
How to Disarm the Security System Using Your 2002 Subaru WRX Key Fob
Disarming the security system of your 2002 Subaru WRX is just as simple using your key fob:
- Press the UNLOCK button on your key fob.
Upon pressing the UNLOCK button, the system should disarm. You will receive confirmation with two horn chirps and two flashes of the parking lights. The security indicator light on the dashboard will turn off, signifying that the security system is disarmed. As a convenience feature, the interior lights will illuminate for 30 seconds. If you arm the system again during this 30-second period, the interior lights will turn off immediately.
How to Stop Alarms on Your 2002 Subaru WRX
If the alarm system on your 2002 Subaru WRX is triggered, you can easily stop it using your key fob or the ignition:
-
Using the Key Fob: Press the UNLOCK button on your key fob. This should immediately disarm the system and stop the alarms.
-
Using the Ignition Switch: If your key fob is unavailable, you can also stop the alarms by quickly turning the ignition switch from the “LOCK” position to the “ON” position three times in rapid succession (within five seconds).
By understanding these features and operating instructions for your 2002 Subaru WRX key fob and security system, you can ensure your vehicle remains secure and protected against unauthorized access.
