Programming your 2002 WRX key fob can be simpler than you think. If you’ve got a new key fob or need to reprogram your existing one, follow these straightforward steps to get your keyless entry working again in no time. This guide provides easy-to-follow instructions for 2002 Subaru Impreza WRX owners.
Step-by-Step Programming Instructions
Here’s how to program your 2002 WRX key fob:
- Get Ready: Ensure all doors are unlocked and closed. Place your foot on the brake and make sure all doors are fully shut.
- Ignition Cycle: Insert your key into the ignition. Quickly cycle the key between the “on” and “off” positions approximately 10 times. The key should be turned to the “on” position just enough to illuminate the dashboard lights, but not far enough to start the engine. Listen for a horn honk, which indicates the system is entering programming mode. It may take more than 10 cycles, so be patient.
- Door and Button Press: Once the horn honks, open and then close the driver’s side door. Immediately press any button on the key fob remote you are programming. This action should program the remote to your vehicle.
- Programming Additional Remotes (Optional): If you have another remote to program, quickly open and close the driver’s door again and press any button on the second remote. Repeat this step for any additional remotes you need to program.
- Exit Programming Mode: After programming all your remotes, remove the key from the ignition. The horn should honk three times to confirm that you have exited the programming mode and the key fobs are now programmed.
Troubleshooting Tips
- Timing is Key: The speed of cycling the ignition is important, but be careful not to rush and damage your ignition switch.
- Patience is a Virtue: If the horn doesn’t honk after 10 cycles, don’t give up immediately. Try again, and ensure the door is fully closed and the brake pedal is pressed. You can also try waiting for a few minutes before attempting again.
- Check Battery: Ensure the battery in your key fob is not dead or low. A weak battery can sometimes prevent successful programming.
By following these steps, you should be able to easily program your 2002 WRX key fob. For replacement key fobs and other automotive key solutions, visit Keylessentryremotefob.com.
