Is your 2003 Nissan Murano Key Fob malfunctioning, or have you acquired a new remote that needs programming? Avoid expensive dealership programming fees by following these simple steps to program your 2003 Nissan Murano key fob yourself. This guide provides a clear and concise method to get your key fob working seamlessly with your vehicle.
Simple Steps to Program Your 2003 Nissan Murano Key Fob
Follow these instructions carefully to successfully program your key fob:
-
Door Lock Initiation: Begin by closing and locking all doors of your 2003 Nissan Murano. Utilize the power lock/unlock button located on the driver’s side door to ensure all doors are securely locked.
-
Ignition Key Cycling Procedure: Insert the ignition key into the ignition cylinder of your Nissan Murano. Quickly turn the key to the ‘on’ position and then immediately remove it from the ignition. Repeat this insert and remove cycle a total of six times within a 10-second timeframe. Successful execution of this step will be indicated by the flashing of the hazard lamps. Note: Pay close attention for the hazard lights flash to confirm entry into programming mode. The visual indicator inside the car might be subtle.
-
Accessory Mode Engagement: Re-insert the key into the ignition cylinder and turn it to the ACC (Accessory) position.
-
Remote Transmitter Activation: Within 5 seconds of turning the ignition key to the ACC position, press any button on your 2003 Nissan Murano key fob remote transmitter. Upon successful programming of the key fob, the hazard lamps should flash once more to provide confirmation. If you press the ‘LOCK’ button on the remote, you may hear the doors attempt to lock as an additional confirmation. Note: It’s crucial to press the button on the remote transmitter only once during this step. Multiple presses can disrupt the programming sequence.
-
Programming Additional or Existing Transmitters (If Necessary): If you have additional key fobs to program, including replacement or existing remotes that need reprogramming, first unlock and then lock all doors again using the driver’s side power lock/unlock switch. Within 5 seconds of locking the doors, press any button on the next remote transmitter you wish to program. The hazard lamps should flash to confirm successful programming for each subsequent remote. Repeat this step for every additional transmitter, including any existing transmitters, as they may also require reprogramming during this process.
By adhering to these step-by-step instructions, you should be able to successfully program your 2003 Nissan Murano key fob. If you encounter any difficulties, carefully review each step to ensure accuracy and proper timing.
