Lost your key fob or need to program a new one for your 2004 Infiniti G35? You’re in the right place. As automotive locksmith experts at keyfobprog.com, we provide you with free, easy-to-follow instructions to program your Infiniti G35 keyless entry remote. No need to pay dealership prices – you can do it yourself!
This guide specifically covers the 2004 Infiniti G35, ensuring you get the correct procedure for your vehicle. We understand the frustration of a malfunctioning or lost key fob, and our goal is to get you back on the road quickly and affordably.
Programming Your 2003-2004 Infiniti G35 Key Fob: A DIY Guide
For 2003 and 2004 Infiniti G35 models, the programming process is straightforward and can be completed without special tools. Follow these steps carefully to successfully program your key fob:
-
Prepare Your Vehicle: Begin by closing and locking all doors of your Infiniti G35. Ensure you use the driver’s side power lock/unlock switch to lock the doors. This is a crucial first step to initiate the programming sequence.
-
Ignition Key Cycling: This is where timing is important. Insert your key into the ignition and remove it completely at least six times in rapid succession, within a 10-second timeframe. Speed is key, but ensure each removal is complete. If done correctly, your hazard lamps will flash, indicating that your G35 has entered programming mode. If the hazard lamps do not flash, repeat this step, ensuring you are withdrawing the key fully and maintaining a quick but consistent pace.
-
Enter ACC Mode: Once the hazard lamps have flashed, insert the key back into the ignition cylinder and turn it to the “ACC” (Accessory) position. This powers the vehicle’s accessories without starting the engine and prepares the system to receive the new key fob signal.
-
Transmitter Activation: Within 5 seconds of turning the key to ACC, press any button on the remote transmitter (the key fob) that you are programming. It is important to only press the button once during this step. If you press the button multiple times, the programming procedure may fail, and you’ll need to start over. If successful, your hazard lamps should flash again to confirm the signal has been received.
-
Programming Additional Transmitters (Optional): If you have additional key fobs to program – including existing remotes you want to ensure still work – now is the time. First, unlock and then lock all doors again using the driver’s side power lock/unlock switch. Within 5 seconds of locking the doors, press any button on the next remote transmitter you wish to program. The hazard lamps should flash to confirm successful programming of each additional remote. Repeat this process for every key fob you need to program.
-
Finalizing Programming: To exit programming mode, turn the ignition key to the “OFF” position and remove the key from the ignition. Unlock the doors using the driver’s side power lock/unlock switch and open the driver’s side door. This completes the key fob programming process for your 2004 Infiniti G35. Test all programmed key fobs to ensure they are working correctly by locking and unlocking the doors and, if applicable, testing the panic button.
Important Notes for Successful Programming
- Timing is Critical: The key cycling and button presses need to occur within the specified timeframes. If you are having trouble, double-check your timing and try again.
- Complete Key Removal: Ensure you completely remove the key from the ignition cylinder during the key cycling step. Partial removals may not register correctly with the system.
- One Button Press: Only press the button on the key fob once during the transmitter activation step. Multiple presses can disrupt the programming sequence.
- Hazard Lamp Confirmation: The hazard lamps flashing are your primary indicator of success at each step. Pay close attention to these signals.
What About 2005-2008 Infiniti G35 Models?
The programming procedure outlined above is specifically for the 2003-2004 Infiniti G35. While the 2005-2007 models without the smart entry system use a very similar procedure (detailed in the original article for those years), the 2007-2008 Infiniti G35 models require professional programming.
Unfortunately, there is no manual DIY method available for programming key fobs for the 2007 and 2008 Infiniti G35. These later models have more sophisticated security systems that necessitate specialized equipment to program new key fobs.
If you have a 2007 or 2008 Infiniti G35, you will need to contact a qualified locksmith or your local Infiniti dealership to have your key fobs programmed. While this may incur a cost, it ensures the job is done correctly and your vehicle’s security system remains intact.
Need Professional Key Fob Programming?
While DIY programming is possible for the 2004 Infiniti G35, there are situations where professional help is recommended or necessary. If you encounter difficulties with the DIY method, or if you have a later G35 model (2007-2008), contacting a locksmith is your best option.
Low Rate Locksmith is a network of professional automotive locksmiths ready to assist you with your Infiniti G35 key fob programming needs. We offer competitive rates and expert service to get you back on the road quickly. Find a Low Rate Locksmith location near you for fast and reliable service.
Programming your 2004 Infiniti G35 key fob yourself can save you time and money. By following these instructions carefully, you can regain full access to your vehicle’s keyless entry system. For other years or if you need professional assistance, remember Low Rate Locksmith is here to help!
