Lost your 2005 Acura TL key fob or need to program a new replacement? You’re in the right place. Programming your key fob for your 2005 Acura TL can seem daunting, but it’s actually a straightforward process you can accomplish right at home. This guide provides you with clear, step-by-step instructions to program your 2005 Acura TL key fob quickly and efficiently. No need to spend extra money at the dealership – take control and program your remote yourself!
Before you begin, it’s important to understand a few key points. When you enter programming mode on your 2005 Acura TL, all previously programmed key fobs are erased. This means you will need to reprogram all of your key fobs, not just the new one. Make sure you have all the remotes you intend to use with your vehicle present before starting the programming sequence. Also, timing is crucial. Each step must be completed within 4 seconds of the previous one to keep the system from exiting programming mode. Furthermore, you must program each remote within 10 seconds of each other. Let’s get started!
Step-by-Step Programming Instructions:
-
Turn the Ignition to the ‘ON’ Position (II). Insert your key into the ignition switch and turn it to the “ON” position. This is the position just before you would start the engine. The dashboard lights should be illuminated.
-
Press the LOCK or UNLOCK Button on a Remote Within 4 Seconds. Take one of your key fobs (it can be a new, unprogrammed remote or one that was previously working) and press either the “LOCK” or “UNLOCK” button.
-
Turn the Ignition to the ‘LOCK’ (0) Position Within 4 Seconds. Turn the ignition key back to the “LOCK” or “OFF” position (position 0). Do not remove the key from the ignition.
-
Turn the Ignition Back to the ‘ON’ (II) Position Within 4 Seconds. Quickly turn the ignition key back to the “ON” position (II).
-
Repeat Steps 2, 3, and 4 Two More Times. Continue this cycle two more times, for a total of three cycles of turning the ignition ON, pressing a button on the remote, and turning the ignition OFF. Make sure to use the same key fob button (LOCK or UNLOCK) each time you press the button in step 2.
-
Press the LOCK or UNLOCK Button Again Within 4 Seconds. After the third cycle, and within 4 seconds of turning the ignition to “ON” for the third time, press the “LOCK” or “UNLOCK” button on the same remote one more time. If you have successfully entered programming mode, the power door locks should cycle (lock and then unlock) automatically. This confirms that your 2005 Acura TL is now in programming mode and ready to learn new key fobs.
-
Press the LOCK or UNLOCK Button on the Same Remote Within 10 Seconds. Immediately after the door locks cycle, and within 10 seconds, press the “LOCK” or “UNLOCK” button on the same remote you’ve been using throughout these steps. The door locks should cycle again to confirm that this remote has been successfully programmed.
-
Program Additional Remotes Within 10 Seconds Each. If you have other key fobs to program, now is the time. Within 10 seconds of programming the first remote (and the door locks cycling), press the “LOCK” or “UNLOCK” button on the next remote you want to program. The door locks should cycle again to confirm successful programming. Repeat this step for all remaining key fobs you wish to program. Remember, you must program all your remotes at this time, as previous programming has been erased.
-
Turn the Ignition to the ‘LOCK’ (0) Position to Exit Programming Mode. Once you have programmed all desired key fobs, turn the ignition switch to the “LOCK” (0) position to exit the programming mode.
-
Test Your Remotes. Remove the key from the ignition and test each of your newly programmed key fobs to ensure they are working correctly. Press the “LOCK,” “UNLOCK,” and “PANIC” buttons to verify all functions are operating as expected.
Troubleshooting Tips:
- Timing is Critical: The most common reason for programming failure is incorrect timing. Ensure you are completing each step within the 4-second and 10-second timeframes. It might be helpful to practice the sequence a few times to get a feel for the timing before you actually attempt to program your remotes.
- Fresh Batteries: Make sure the batteries in your key fobs are fresh and have sufficient charge. Low batteries can sometimes interfere with the programming process.
- Correct Key Fob: Ensure you are using the correct type of key fob for your 2005 Acura TL. If you purchased a replacement fob, verify it is compatible with your vehicle. You can often find the correct part number on your original remote or in your vehicle’s owner’s manual. (Original article mentions part number E4EG8D-444H-A).
- Start Over: If you encounter problems, don’t hesitate to start the entire programming sequence over from step 1. Sometimes, a fresh start can resolve timing or procedural errors.
By following these instructions carefully, you should be able to successfully program your 2005 Acura TL key fobs yourself. Enjoy the convenience of your working remote! If you are still in need of a replacement key fob, be sure to visit Keylessentryremotefob.com for a wide selection of remotes and excellent customer service.
