Is your 2005 Honda Element key fob failing, or did you purchase a new remote online? Programming a key fob for your Honda Element might seem like a dealer-only task, but in many cases, you can easily do it yourself at home. This guide provides clear, easy-to-follow instructions to program your 2005 Honda Element key fob, saving you time and money.
Before you begin, it’s important to understand that entering programming mode will erase all previously programmed key fobs. Therefore, you will need to reprogram all of your key fobs during this process, not just the new one. Make sure you have all the remotes you intend to use with your vehicle ready before starting.
Here’s how to program your 2005 Honda Element key fob:
-
Turn the ignition switch to the ON (II) position. This is the position right before you would crank the engine to start. The dashboard lights should be illuminated.
-
Press the LOCK or UNLOCK button on one of your key fobs. It doesn’t matter which button you press, and you can use an unprogrammed remote for this step if needed.
-
Turn the ignition switch to the LOCK (0) position. This is the OFF position where you can remove your key.
-
Repeat steps 1, 2, and 3 two more times using the same key fob from step 2. You will be cycling the ignition ON, pressing a button, and OFF, for a total of three times in a row.
-
Turn the ignition switch to the ON (II) position again. This is the final time you turn the ignition to ON during this sequence.
-
Press the LOCK or UNLOCK button on the same key fob used in step 2. If you have successfully entered programming mode, the power door locks should cycle (lock and then unlock) automatically. This confirms that your Element is now ready to learn new key fob codes.
-
Press the LOCK or UNLOCK button on each key fob you want to program. For each key fob button press, the power door locks should cycle again, indicating that the system has accepted and programmed that remote. Do this for every remote you want to be active with your vehicle, including the original ones and any new ones.
-
Turn the ignition switch to the LOCK (0) position to exit programming mode. Once you turn the ignition off, the programming process is complete.
-
Test your remotes. Press the LOCK and UNLOCK buttons on each programmed key fob to ensure they are working correctly with your 2005 Honda Element’s door locks.
By following these steps carefully, you should be able to successfully program your 2005 Honda Element key fob yourself. This DIY method can save you a trip to the dealership and the associated costs. Enjoy the convenience of your keyless entry system once again!
