Are you looking to program a new key fob for your 2005 Chrysler PT Cruiser? It’s a common need, whether you’ve lost your old one, or simply want a spare. Fortunately, programming a key fob for your 2005 PT Cruiser can often be done at home, saving you a trip to the dealership. This guide provides simple, step-by-step instructions to program your 2005 Pt Cruiser Key Fob quickly and efficiently.
Before you begin, it’s important to note that these procedures typically work if you already have at least one working key fob. If you don’t have a working remote, you may need to visit a dealership or a qualified automotive locksmith for programming services.
Here are two procedures you can try to program your 2005 PT Cruiser key fob:
Procedure 1: Using the Ignition and Remote Buttons
This is a straightforward method that utilizes your PT Cruiser’s ignition system and the buttons on your existing, working remote.
-
Turn Ignition to ON: Insert your key into the ignition and turn it to the “ON” position. Do not start the engine; simply turn the key to the point where the dashboard lights illuminate.
-
Press and Hold Unlock: On your working remote, press and hold the “Unlock” button for ten seconds.
-
Press Panic Button: While still holding the “Unlock” button, press the “Panic” button for one second.
-
Release Buttons: Release both the “Unlock” and “Panic” buttons simultaneously. You should hear a chime from your vehicle, indicating that it has entered programming mode.
-
Program First Remote: Take the new remote you wish to program and press any button on it. The vehicle should chime again, confirming that the first new remote has been programmed.
-
Program Additional Remotes (Optional): If you have another remote to program, press any button on that remote now. The vehicle will chime once more, indicating successful programming of the second remote.
-
Exit Programming Mode: Turn the ignition off to exit the programming sequence. Test each of your programmed remotes to ensure they are working correctly by locking and unlocking your doors.
Procedure 2: Utilizing Lock/Unlock Button Combination
This second procedure is very similar but incorporates a combination of the “Lock” and “Unlock” buttons for programming.
-
Ignition to ON: Just like in Procedure 1, insert your key into the ignition and turn it to the “ON” position, without starting the engine.
-
Press and Hold Unlock (Working Remote): Press and hold the “Unlock” button on your functioning remote for ten seconds.
-
Press Panic Button: While holding “Unlock”, press the “Panic” button for one second, then release both buttons at the same time. Listen for the vehicle chime to signal programming mode activation.
-
Lock and Unlock Button Sequence (New Remote 1): On the first new remote, press and release both the “Lock” and “Unlock” buttons together. The vehicle will chime. Immediately after this chime, press and release just the “Unlock” button on the same remote. The vehicle should chime again, confirming programming for this remote.
-
Lock and Unlock Button Sequence (New Remote 2 – Optional): If programming a second new remote, repeat step 4 with the second remote. Press and release “Lock” and “Unlock” together, listen for the chime, then press and release “Unlock” again, and listen for the final chime.
-
Exit Programming: Turn the ignition off to exit the programming mode. Test all programmed remotes to verify they are functioning correctly.
If you encounter any difficulties programming your 2005 PT Cruiser key fob using these methods, or if you lack a working remote to begin with, professional assistance is readily available. Automotive locksmiths and dealerships have specialized tools and expertise to program your key fobs efficiently. You can also use online services to locate a qualified key fob installer in your local area for professional programming services.
