Here are the programming instructions for a 2006 Hyundai Santa Fe Key Fob Remote. If you require an additional Key Fob or a Replacement Fob for your vehicle, please visit us at Keylessentryremotefob.com.
ORDER THIS KEY FOB PART NUMBER HERE: 95411-26203
Programming Steps:
Ensure you have all remote transmitters for your 2006 Hyundai Santa Fe before starting.
-
Begin by locating the alarm system control module. This is positioned under the steering column. You will need to remove the plate covering to access it. Once accessible, find the memory switch on the control module and turn it to the Off position. The control module is typically a black box situated behind and below the fuse box, near the hood release lever.
-
Insert the key into the ignition of your Hyundai Santa Fe and turn it to the On position. Allow it to remain in the ‘On’ position for approximately 5 seconds. After waiting, switch the memory switch on the control module to the Set position. Note: Some 2006 Hyundai Santa Fe models might not require the key to be in the ignition before setting the memory switch.
-
Proceed to program your key fob(s). Press the lock button on the first remote you are programming. If you have additional remotes, press the lock button on each of them as well.
-
Return the memory switch to the Off position. Turn the ignition off and remove the key from your Hyundai Santa Fe.
-
Reinstall the alarm plate that covers the control module under the steering column. Test each of your programmed remotes to ensure they are working correctly with your 2006 Hyundai Santa Fe.
If you encounter difficulties programming your key fob, or prefer professional assistance, you can find a local key fob programming service. Enter your city or zip code in the search tool on our website Keylessentryremotefob.com to locate a professional installer in your area.
