Lost or need to replace your 2006 Pontiac G6 GT key fob? Facing hefty locksmith or dealership fees can be frustrating. The good news is, programming a new key fob for your 2006 Pontiac G6 GT can often be done yourself, saving you both time and money. This guide provides step-by-step instructions to program your key fob, ensuring you’re back on the road quickly and without breaking the bank.
Programming your 2006 Pontiac G6 GT key fob is a straightforward process that doesn’t require any specialized tools. Whether you purchased a new aftermarket key fob or are reprogramming an existing one, these instructions will walk you through the necessary steps. Keep in mind that this procedure is designed to program both the keyless entry transmitter and, in some cases, the transponder chip within the key itself.
Here’s how to program your 2006 Pontiac G6 GT key fob:
-
Get Comfortable in the Driver’s Seat: While the original instructions mention the driver’s seat, many find it easier to perform these steps from the front passenger seat of your Pontiac G6 GT. Position yourself comfortably to access the ignition and fuse panel.
-
Remove the Ignition Key: Ensure the ignition key is completely removed from the ignition lock cylinder of your 2006 Pontiac G6 GT.
-
Close All Doors: Make sure all doors of your Pontiac G6 GT, including the trunk or hatchback, are fully closed.
-
Locate and Remove the MALL PGM Fuse: Refer to your Pontiac G6 GT owner’s manual for the precise location of the fuse panel and the MALL PGM fuse. Carefully remove this fuse from the panel.
-
Turn Ignition to ACC Position: Insert the ignition key and turn the ignition lock cylinder to the ACC (Accessory) position.
-
Cycle Ignition ACC and OFF: Turn the ignition lock cylinder OFF, and then quickly back to the ACC position within one second. This rapid cycling is crucial for initiating the programming sequence.
-
Open and Close Any Door: Open and then close any door on your 2006 Pontiac G6 GT. This action signals the system to enter programming mode.
-
Listen for the Chime: You should hear an audible chime. This chime indicates that the remote control door lock receiver has successfully entered the programming/diagnostic mode. If you do not hear a chime, carefully repeat steps 1 through 7. Success in this step is essential for proceeding with the key fob programming.
-
Program the Transmitter(s): Within 14 seconds of hearing the chime, press and hold both the LOCK and UNLOCK buttons on the key fob simultaneously for approximately 14 seconds. If programming additional key fobs, repeat this step for each transmitter.
-
Synchronization and Programming Confirmation: After approximately 7 seconds of holding the buttons, you might hear a chime confirming successful synchronization. Wait for about 14 seconds in total; you should hear another chime confirming successful programming of the key fob to your 2006 Pontiac G6 GT.
-
Remove Ignition Key: Take the ignition key out of the ignition lock cylinder.
-
Reinstall the MALL PGM Fuse: Return to the fuse panel and carefully reinstall the MALL PGM fuse in its correct location.
-
Test Key Fobs: Thoroughly test all programmed key fobs to ensure they are operating correctly with your 2006 Pontiac G6 GT. Verify that the lock, unlock, and any other functions are working as expected.
Important Considerations:
- Erase Previous Programming: Be aware that initiating the programming mode will erase all previously programmed key fobs. Therefore, you must reprogram all of your key fobs, both old and new, during this procedure.
- Program One Vehicle at a Time: If you are programming key fobs for multiple vehicles, ensure you program them one at a time. Programming multiple vehicles simultaneously could lead to a single transmitter being incorrectly programmed to more than one vehicle.
- Limited Transmitter Capacity: The remote control door lock receiver in your 2006 Pontiac G6 GT can store up to 4 transmitters in its memory.
By following these steps, you can successfully program a key fob for your 2006 Pontiac G6 GT, potentially saving yourself a significant amount of money compared to professional services. Always ensure you are using a compatible key fob for your vehicle to guarantee successful programming.
