Is your 2007 Acura TL key fob not working as expected? Perhaps you’ve replaced the key fob battery and now need to reprogram it, or maybe you’ve added a new key fob. Whatever the reason, programming your Acura TL key fob yourself can save you time and money. This guide provides easy-to-follow instructions to get your key fob working perfectly with your vehicle.
Step-by-Step Programming Instructions
Follow these steps carefully to program your 2007 Acura TL key fob. Ensure you have all your key fobs you wish to program with you before starting.
-
Ignition ON: Insert your Acura TL key into the ignition and turn it to the “ON” position. This is the position right before you would start the engine.
-
Press UNLOCK (Remote 1): Press the “UNLOCK” button on your first key fob that you are programming. Make sure to use the same key fob until instructed otherwise in step 13.
-
Ignition OFF: Turn the ignition key to the “OFF” position. This is the position where you can remove the key, but do not remove it yet.
-
Ignition ON: Turn the ignition key back to the “ON” position.
-
Press UNLOCK (Remote 1): Press the “UNLOCK” button on the same first key fob again.
-
Ignition OFF: Turn the ignition key to the “OFF” position once more. Again, do not remove the key.
-
Ignition ON: Turn the ignition key to the “ON” position.
-
Press UNLOCK (Remote 1): Press the “UNLOCK” button on the same first key fob for the third time.
-
Ignition OFF: Turn the ignition to the “OFF” position. Do not remove the key.
-
Ignition ON: Turn the ignition key to the “ON” position for the final time in this sequence.
-
Press UNLOCK (Remote 1): Press the “UNLOCK” button on the first key fob one last time. At this point, you should hear the door locks cycle. This indicates that your Acura TL has successfully entered programming mode.
-
Press UNLOCK (Remote 1): Immediately press the “UNLOCK” button on the same first key fob again. The door locks should cycle once more, confirming that this key fob has been successfully programmed.
-
Program Additional Remotes: If you have additional key fobs to program, repeat step 12 for each of them.
-
Finish: Turn the ignition key to the “OFF” position and remove the key from the ignition.
Now, test all of your programmed key fobs to ensure they are working correctly with your 2007 Acura TL. If you’ve recently changed your 2007 Acura Tl Key Fob Battery, these steps should help you restore full functionality to your remote.
If you encounter any difficulties programming your key fob, or prefer professional assistance, you can search for a qualified key fob installer in your local area. They can provide expert services to program your key fob and ensure it works seamlessly with your vehicle’s system.
