Program Your 2007 GMC Yukon XL Key Fob Easily

Lost your key fob or need to program a new remote for your 2007 GMC Yukon XL? You’re in the right place. As auto repair experts at keyfobprog.com, we provide straightforward, step-by-step instructions to program your keyless entry remote fob right at home. Forget expensive dealership programming – you can do it yourself quickly and easily. This guide covers programming procedures for 2007 GMC Yukon XL vehicles, ensuring you regain full control over your vehicle’s keyless entry system.

Programming for 2007 GMC Yukon XL with Driver Information Center (DIC) Buttons

If your 2007 GMC Yukon XL is equipped with Driver Information Center buttons, follow these instructions to program your key fob:

1. Insert your key into the ignition and turn it to the ON position. This is the position where you can access your Driver Information Center. Do not start the engine.
2. Press the vehicle information button repeatedly until you see “PRESS TO RELEARN REMOTE KEY” displayed on the DIC screen.
3. Once this message is displayed, press and hold the set/reset button until the DIC screen shows “REMOTE KEY LEARNING ACTIVE”. Your Yukon XL is now in key fob programming mode.
4. Take your first keyless remote. Simultaneously press and hold both the LOCK and UNLOCK buttons on the remote for about 15 seconds. You should hear a chime sound, indicating that the remote has been successfully programmed.
5. If you need to program additional key fobs, repeat step 4 immediately for each additional remote. A 2007 GMC Yukon XL can have up to eight remotes programmed to it.
6. To exit the programming mode, turn the ignition key to the OFF position and remove the key from the ignition.
7. Test all programmed remotes to ensure they are working correctly by locking and unlocking your doors, and activating other remote functions.

Programming for 2007 GMC Yukon XL without Driver Information Center (DIC) Buttons

For 2007 GMC Yukon XL models without DIC buttons, use this procedure:

1. Ensure your vehicle is in Park (P) and the ignition key is in the ON position (as far as you can turn it without starting the engine).
2. Press and release the trip odometer reset stem repeatedly until “RELEARN REMOTE KEY” is displayed in the instrument panel.
3. Press and hold the trip odometer reset stem for approximately three seconds. The message “REMOTE KEY LEARNING ACTIVE” will appear, indicating the vehicle is ready to program a new key fob.
4. Take your first keyless remote and press and hold both the LOCK and UNLOCK buttons at the same time for about 15 seconds. A chime will sound to confirm that the remote has been programmed successfully.
5. To program any additional remotes, immediately repeat step 4 for each new remote. You can program up to eight remotes for your 2007 GMC Yukon XL.
6. Turn the ignition key to the OFF position and remove the key to exit programming mode.
7. Test all programmed key fobs to verify they are functioning as expected.

By following these simple steps, you can easily program your 2007 Gmc Yukon Xl Key Fob and regain the convenience of keyless entry. This DIY approach saves you time and money, getting you back on the road with a fully functional key fob in no time.