Is your 2007 Infiniti G35 key fob suddenly not working? It can be frustrating when your keyless entry remote fails to respond, leaving you struggling to lock, unlock, or start your vehicle remotely. Fortunately, you might be able to resolve this issue by reprogramming your key fob yourself. This guide provides a step-by-step process to reprogram your 2007 Infiniti G35 key fob, potentially saving you time and money.
Before assuming your key fob is broken, reprogramming is a good first step. Follow these instructions carefully to attempt reprogramming your Infiniti G35 key fob:
-
Ensure All Doors Are Closed and Locked: Begin by making sure all doors of your 2007 Infiniti G35 are completely closed and securely locked. This is crucial for initiating the reprogramming sequence.
-
Ignition Key Cycling: This is the core of the process. Insert your key into the ignition cylinder and remove it more than six times within a 10-second timeframe. It’s important to fully remove the key from the ignition cylinder each time. You should see the hazard warning lamps flash if this step is performed correctly, indicating the system is entering programming mode.
Note: Avoid rushing this step. The system needs to register each key insertion and removal. If you perform this step accurately, the side marker, tail, and license plate lamps, along with the interior lights, will flash twice as confirmation.
-
Turn Ignition to “AAC” Position: Immediately after the hazard lamps flash, insert the key back into the ignition cylinder and turn the ignition switch to the “AAC” (Accessory) position. This action registers the new key fob ID code and erases any previously stored codes.
-
Press Any Button on the New Remote: Take your new remote controller (or the one you are trying to reprogram) and press any button on it once. Observe the hazard warning lamps; they should flash again to confirm successful programming of this specific remote.
Important: Press the button only once. Multiple presses can disrupt the programming sequence and lead to failure. Successful programming is indicated by two flashes of the side marker, tail, license plate, and interior lamps.
-
Programming Additional Remotes (If Applicable): If you have more than one remote to program, skip this step if you only have one. For each additional remote, you will need to manually unlock and then lock the doors using the power door lock/unlock switch located on the power window main switch panel. Repeat step 4 for each additional key fob you need to program.
-
Remove Key from Ignition: After programming all desired key fobs, remove the key from the ignition.
-
Finalize the Process: Unlock the driver’s side door, open the driver’s side door, and then close it. This completes the key fob reprogramming procedure for your 2007 Infiniti G35.
Note: You can program up to four key fobs for your 2007 Infiniti G35. Any attempts to program more than four will be ignored by the system.
By following these steps, you can often resolve a non-working 2007 Infiniti G35 key fob issue. If your key fob still doesn’t work after attempting this reprogramming procedure, consider checking the key fob battery or seeking assistance from a professional automotive locksmith or Infiniti dealership for further diagnosis and repair.
