2007 Infiniti G35 Key Fob Programming Guide - Keyless Entry Remote Fob
2007 Infiniti G35 Key Fob Programming Guide - Keyless Entry Remote Fob

2007 Infiniti G35 Key Fob Programming: A Step-by-Step Guide

Is your 2007 Infiniti G35 key fob no longer working, or did you get a replacement and need to program it? Don’t worry, programming your key fob for your 2007 Infiniti G35 can be done easily with a few simple steps. This guide from keyfobprog.com will walk you through the process to get your remote working again in no time.

2007 Infiniti G35 Key Fob Programming Guide - Keyless Entry Remote Fob2007 Infiniti G35 Key Fob Programming Guide – Keyless Entry Remote Fob

Here are the programming instructions for your 2007 Infiniti G35 key fob:

  1. Close and lock all doors on your Infiniti G35 using the power lock/unlock switch located on the driver’s side door.

  2. Insert your key into the ignition and remove it quickly. Repeat this insert and remove process at least six times within a 10-second timeframe. If this step is performed correctly, your Infiniti G35’s hazard lamps will flash, indicating that the system has entered programming mode.
    NOTE: Ensure you completely remove the key from the ignition cylinder each time. Performing this procedure too rapidly may prevent the system from entering programming mode.

  3. Insert the key back into the ignition cylinder and turn it to the ACC (Accessory) position.

  4. Within 5 seconds of turning the key to ACC, push any button on the key fob remote you are programming. Your hazard lamps should flash again to confirm successful programming of that remote.
    NOTE: Press the button on the remote transmitter only one time. Pressing the button more than once in this step will cause the programming procedure to fail.

  5. If you have additional key fobs (including any old ones you want to reprogram), unlock and then lock all doors using the driver’s side power lock/unlock switch again. Within 5 seconds, push any button on the next remote. Your hazard lamps should flash to confirm. Repeat this step for each additional key fob you need to program.

  6. Finally, turn the key to the OFF position and remove it from the ignition. Unlock the doors using the driver’s side power lock/unlock switch and open the driver’s side door to exit programming mode.

Now you should have successfully programmed your 2007 Infiniti G35 key fob! Test all the buttons to ensure they are working correctly. If you are still experiencing issues programming your key fob, or prefer professional assistance, you can search for a local key fob programming service in your area by entering your city or zip code in a search engine.

Comments

No comments yet. Why don’t you start the discussion?

Leave a Reply

Your email address will not be published. Required fields are marked *