Is your 2007 Nissan Xterra Key Fob malfunctioning, or have you acquired a new one that needs programming? You’re in the right place! As your trusted auto repair experts at keyfobprog.com, we provide you with a straightforward, step-by-step guide to program your 2007 Nissan Xterra key fob yourself. No need to visit a dealership right away – you can easily handle this process in the comfort of your own garage.
Step-by-Step Guide to Program Your 2007 Nissan Xterra Key Fob
Follow these instructions carefully to program your 2007 Nissan Xterra key fob successfully. Before you begin, ensure you are inside your Nissan Xterra with all doors closed and locked. Use the manual lock switch on the driver’s side door to lock the doors, not the remote.
-
Ignition Cycle Initiation: Insert your key into the ignition and remove it rapidly six times within a 10-second period. Make sure each insertion and removal is a complete cycle, taking approximately one second each time. If done correctly, your Nissan Xterra’s hazard lights will flash. If the hazards do not flash, repeat this step, increasing the cycle to 10 times instead of six. This step is crucial for entering programming mode.
-
Enter ACC Mode: After the hazard lights flash, insert the key back into the ignition and turn it to the ACC (Accessory) position. Do not start the engine.
-
Program the First Key Fob: Within 5 seconds of turning the ignition to ACC, press the lock button on your new 2007 Nissan Xterra key fob once. If the programming is successful for this remote, the hazard lamps will flash again to confirm.
-
Programming Additional Key Fobs (Optional): If you have more key fobs to program, including existing working remotes or additional new ones, you need to proceed with this step. If not, skip to step 6. First, using the driver’s side door lock/unlock switch (again, not the remote), unlock and then immediately lock the doors. Within 5 seconds after locking the doors, press the lock button on the next key fob you wish to program. The hazard lamps will flash to confirm successful programming of this additional remote as well. Repeat this process for every key fob you need to program.
-
Exit Programming Mode and Test: Once you have programmed all desired key fobs, turn the ignition to the OFF position and completely remove the key from the ignition. Unlock all doors using the lock/unlock switch located on the driver’s side door.
-
Final Test: Test each of your programmed key fobs to ensure they are working correctly. Try locking and unlocking the doors, as well as activating any other functions your key fob may have.
If you encounter any difficulties programming your 2007 Nissan Xterra key fob, or if you prefer professional assistance, remember that keyfobprog.com is here to help. Should you need a replacement key fob, we offer a wide selection of key fobs for various vehicles.
[ ]
[ ]
