Are you looking to program a new key fob for your 2007 Nissan Xterra? It’s a common need when you’ve lost a fob, purchased a replacement, or simply want an extra one for convenience. Luckily, programming your key fob at home is a straightforward process that can save you a trip to the dealership. This guide will walk you through each step to successfully program your 2007 Nissan Xterra key fob quickly and easily.
Before you begin, ensure you have your new, unprogrammed key fob and your Nissan Xterra key. The programming process utilizes your vehicle’s existing systems and is designed for user-friendly setup right in your driveway. Let’s get started and get your key fob working in no time.
Programming Instructions:
-
Enter the Vehicle and Secure Doors: Begin by getting inside your 2007 Nissan Xterra. Once inside, close and then LOCK all the doors using the manual lock/unlock switch located on the driver’s side door panel. It’s crucial not to use your remote for this step; use the physical switch.
-
Ignition Key Cycling: This step initiates the programming sequence. Take your Nissan Xterra key and insert it into the ignition, then remove it a total of six times in rapid succession, all within a 10-second timeframe. Each insertion and removal should be a complete cycle, taking roughly one second. If you perform this step correctly, the hazard lights on your Nissan Xterra will flash. This flash is your confirmation that the vehicle has entered programming mode. If the hazards do not flash after six cycles, attempt the procedure again, this time trying ten cycles instead of six.
-
Ignition to ACC: Now, insert the key back into the ignition and turn it to the ACC (Accessory) position. Do not start the engine; simply turn the key to the ACC position where the car’s accessories can be powered.
-
Remote Lock Button Activation: Within five seconds of turning the ignition to ACC, take your new key fob and press the LOCK button once. If the programming is successful for this remote, your Nissan Xterra’s hazard lamps will flash again, confirming that the new key fob has been recognized and programmed.
-
Programming Additional Remotes (Optional): If you have more remotes to program, including both new and any existing working remotes, you’ll need to follow this step. If you only have one remote to program, you can skip to step 6. Using the lock/unlock switch on the driver’s side door (not the remote), first UNLOCK and then LOCK the doors. Within five seconds of locking the doors with the switch, press the lock button on the next remote you wish to program. Again, the hazard lamps will flash to confirm successful programming of this additional remote. Repeat this process for every remote you need to program.
-
Exit Programming Mode: Once you have programmed all desired key fobs, turn the ignition to the OFF position and completely remove the key from the ignition. Then, use the lock/unlock switch on the driver’s side door to UNLOCK all the doors. Do not use the remote for this step.
-
Test Key Fobs: Finally, test each of your programmed key fobs to ensure they are working correctly. Try the lock, unlock, and panic buttons to verify full functionality of each remote.
If you encounter any difficulties during this programming process, or if you prefer to have a professional handle the programming for you, consider seeking assistance from a certified automotive locksmith or a qualified service technician. They have the expertise and tools to ensure your key fobs are programmed correctly and efficiently. You can often find local professionals online by searching for “key fob programming services near me.”
