Lost or need a spare key fob for your 2008 Cadillac SRX? Programming a new key fob for your vehicle can be done easily at home, saving you a trip to the dealership. This guide provides step-by-step instructions for programming your 2008 Cadillac Srx Key Fob, ensuring you regain full access and control of your vehicle. Whether your Cadillac SRX is equipped with the Driver Information Center (DIC) or not, we’ve got you covered with two straightforward procedures.
Procedure #1: For 2008 Cadillac SRX with Driver Information Center (DIC)
If your 2008 Cadillac SRX has the Driver Information Center, programming your key fob is a breeze. The DIC is typically located to the right of your steering wheel and features buttons with a vehicle icon and the letter ‘i’. Follow these simple steps:
-
Ignition Activation: Insert your key into the ignition. Turn the key to the “ON” position. This is the position just before you would start the engine, where the dashboard lights illuminate, but the engine is not running.
-
Access Relearn Remote Key Menu: Locate the vehicle information button on your DIC. Press this button repeatedly until you see the message “PRESS TO RELEARN REMOTE KEY” displayed on the screen.
-
Initiate Programming Mode: Once “PRESS TO RELEARN REMOTE KEY” is displayed, press the set/reset button. This button usually has a checkmark symbol. Press it until the DIC screen shows “REMOTE KEY LEARNING ACTIVE”. Your 2008 Cadillac SRX is now in key fob programming mode and ready to learn new remotes.
-
Program First Key Fob: Take your first key fob remote. Simultaneously press and hold both the “LOCK” and “UNLOCK” buttons. Keep holding them for approximately 15 seconds. You should hear an audible chime or acoustic signal from your vehicle, indicating that the key fob has been successfully programmed.
-
Program Additional Key Fobs: If you have more key fobs to program, repeat step 4 immediately for each additional remote. You can program up to 8 key fobs for your 2008 Cadillac SRX. Remember, you must program all your remotes at this time, including any existing ones that were previously programmed to the vehicle.
-
Exit Programming Mode: To finish the programming process, turn the ignition key to the “OFF” position and remove the key from the ignition.
-
Test Key Fobs: Thoroughly test all programmed key fobs to ensure they are working correctly. Check the lock, unlock, and any other functions your key fob may have.
Procedure #2: For 2008 Cadillac SRX without Driver Information Center (DIC)
If your 2008 Cadillac SRX model does not have the Driver Information Center, you can still program your key fob using a slightly different procedure. Here’s how:
-
Ignition Activation: Insert the ignition key into your 2008 Cadillac SRX and turn it to the “ON” position, just before starting the engine.
-
Access Relearn Remote Key: Locate the trip odometer reset button on your dashboard. Press this button repeatedly until the display shows “RELEARN REMOTE KEY”.
-
Initiate Learning Mode: Once “RELEARN REMOTE KEY” is displayed, press and hold the trip odometer reset button for about 3 seconds. The display should change to “REMOTE KEY LEARNING ACTIVE”, indicating that your vehicle is now in the key fob programming mode.
-
Program First Key Fob: Take your first key fob remote. Press and hold both the “LOCK” and “UNLOCK” buttons on the fob simultaneously for approximately 15 seconds. Listen for the acoustic signal from your Cadillac SRX, confirming successful programming.
-
Program Additional Key Fobs: If you have more key fobs to program, immediately repeat step 4 for each additional remote. Again, you can program up to 8 key fobs, and you must program all of them at once, including any previously working fobs.
-
Exit Programming Mode & Test: Turn the ignition key to the “OFF” position and remove the key. Test all of your programmed key fobs to verify they are functioning as expected.
By following these procedures, you can easily program your 2008 Cadillac SRX key fob yourself. If you encounter any difficulties or prefer professional assistance, you can search online for local key fob programming services in your area.
