Key fobs offer unparalleled convenience, allowing you to effortlessly lock, unlock, and even start your 2008 Chrysler 300 remotely. However, there are times when you might need to program a new key fob, whether you’ve lost one or simply want a spare. Fortunately, if you have two working key fobs, programming a new one for your 2008 Chrysler 300 is a straightforward process you can do yourself. This guide will walk you through the exact steps to program your 2008 Chrysler 300 key fob quickly and easily.
Programming Your 2008 Chrysler 300 Key Fob with Two Existing Keys
If you currently possess two valid, functioning key fobs for your 2008 Chrysler 300, you can program additional key fobs right in your driveway. Follow these simple steps to get your new key fob working:
-
Initial Key Insertion: Begin by inserting your first working key fob into the ignition. Turn the ignition switch to the ON position. Make sure you hold it in this “ON” position for a minimum of three seconds, but importantly, do not leave it in the “ON” position for longer than 15 seconds. After holding it in the ON position for the required time, turn the ignition switch back to the LOCK/OFF position and remove the key fob.
-
Second Key Insertion: Immediately, within 15 seconds of removing the first key, insert your second working key fob into the ignition switch. Again, turn the ignition switch to the ON position. Keep this second key in the “ON” position for approximately 10 seconds. You may hear a chime sound during this time, and the Vehicle Security Light on your dashboard will likely begin to flash. After 10 seconds, turn the ignition switch to the LOCK/OFF position and remove the second key fob.
-
New Key Fob Programming: Now, insert the new, unprogrammed key fob into the ignition switch. Turn the ignition switch to the ON position within 60 seconds of removing the second valid key. After about 10 seconds, you should hear a single chime. The Vehicle Security Light will stop flashing, illuminate steadily for approximately three seconds, and then turn off completely. This sequence of lights and chimes indicates that your new key fob has been successfully programmed to your 2008 Chrysler 300.
At this point, the remote keyless entry (RKE) transmitter functions of the new key fob will also be programmed. You can test all buttons on the new key fob to ensure they are working correctly with your vehicle’s doors and security system.
You can repeat this entire procedure to program up to a total of eight key fobs for your 2008 Chrysler 300.
What If You Only Have One or No Working Key Fobs?
If you don’t have two already programmed key fobs, or if you have lost all of your key fobs for your 2008 Chrysler 300, the DIY programming procedure outlined above will not work. In these situations, you have a couple of options to get new key fobs programmed:
-
Visit a Professional Locksmith: Automotive locksmiths specialize in key and remote programming. Many locksmiths have the necessary equipment to program new key fobs for your 2008 Chrysler 300, even if you don’t have any working keys. You can find a local locksmith by searching online or using directories like LocateALocksmith.com.
-
Dealership Programming: Your local Chrysler dealership can also program new key fobs for your vehicle. While this is often a reliable option, it can sometimes be more expensive than using a locksmith.
-
DIY Key Fob Programmers: For those who prefer a DIY approach and anticipate needing to program keys in the future, you can purchase aftermarket key fob programmers. These devices often come with blank key fobs and allow you to program them to your vehicle. If you are interested in this option, you can explore resources like this programmer and key option.
Conclusion
Programming a 2008 Chrysler 300 key fob is easily achievable at home if you have two existing working keys. By following these steps, you can save time and money compared to dealership programming. However, if you lack two working keys, professional locksmiths or dealerships are readily available to assist, or you might consider investing in a DIY programmer for future convenience. Ensure your vehicle security and remote access are always in your control by having properly programmed key fobs.
