Programming a new key fob for your 2008 Chrysler Town & Country can seem daunting, but it’s often a straightforward process you can handle yourself, especially if you already have two working key fobs. This guide provides step-by-step instructions to program your 2008 Town and Country key fob, saving you time and money.
Step-by-Step Programming Instructions If You Have Two Existing Key Fobs
If you are fortunate enough to have two currently functioning key fobs for your 2008 Chrysler Town & Country, you can easily program additional fobs. Follow these simple steps:
-
Insert and Turn First Valid Key: Place your first working key fob into the ignition. Turn the ignition to the “ON” position. Ensure you leave it in the “ON” position for a minimum of three seconds, but do not exceed 15 seconds. After this duration, turn the ignition back to the “LOCK/OFF” position and remove the key.
-
Insert and Turn Second Valid Key: Within 15 seconds of removing the first key, insert your second working key fob into the ignition. Turn the ignition to the “ON” position. Wait for approximately 10 seconds. You may hear a chime sound, and the Vehicle Security Light on your dashboard will begin to flash. Once this occurs, turn the ignition to the “LOCK/OFF” position and remove the second key.
-
Program the New Key Fob: Now, within 60 seconds, insert the new, unprogrammed key fob into the ignition. Turn the ignition to the “ON” position. After about 10 seconds, you should hear a single chime. The Vehicle Security Light will stop flashing, illuminate steadily for three seconds, and then turn off. This sequence confirms that your new 2008 Town and Country key fob has been successfully programmed.
This procedure programs both the key and the Remote Keyless Entry (RKE) transmitter simultaneously. You can repeat these steps to program up to a total of eight key fobs for your 2008 Chrysler Town & Country.
What If You Don’t Have Two Working Key Fobs?
If you don’t have two working key fobs, the DIY programming method described above will not work. In this situation, you have a couple of options:
-
Visit a Locksmith: Automotive locksmiths have the professional tools and expertise to program key fobs for your 2008 Town & Country, even without existing working keys. They can often provide a more cost-effective solution compared to dealership prices. LocateALocksmith.com is a helpful resource to find a locksmith in your area.
-
Use a Key Fob Programmer: For a more hands-on approach, you can purchase a key fob programmer and a compatible key. These programmers allow you to program keys yourself, even if you only have one or no existing keys. Click Here to Buy a Programmer and Key to explore programmer and key options for your 2008 Chrysler Town & Country.
Conclusion
Programming a 2008 Town & Country key fob can be a simple task if you have two working keys. By following these steps, you can quickly add a new key fob without needing to visit a dealership. However, if you lack two existing keys, professional locksmith services or DIY programmers offer viable alternatives to get you back on the road with a programmed key fob.
