Lost or need a spare key fob for your 2009 Chrysler 300? Programming a new key fob yourself can save you time and money compared to dealership services. This guide provides step-by-step instructions to program a new key fob for your 2009 Chrysler 300, assuming you have two currently working key fobs. If you only have one or no working fobs, don’t worry, we also outline your alternative options.
Step-by-Step Programming with Two Existing Key Fobs
This method is straightforward and allows you to program a new Remote Keyless Entry (RKE) transmitter, also known as a fobik, right in your driveway. Make sure you have two valid, working key fobs before proceeding.
-
First Key Activation: Insert your first working key fob into the ignition switch. Turn the ignition to the ON position. Crucially, keep it in the ON position for a minimum of three seconds, but do not exceed 15 seconds. After this interval, turn the ignition switch back to the LOCK/OFF position and remove the key.
-
Second Key Initiation: Immediately insert your second working key fob into the ignition switch. Again, turn the ignition to the ON position within 15 seconds of removing the first key. Hold it in the ON position. After approximately 10 seconds, you may hear a chime sound. Additionally, the Vehicle Security Light on your dashboard will begin to flash. Once these indicators appear, turn the ignition switch to the LOCK/OFF position and remove the second key.
-
New Key Programming: Now, within 60 seconds, insert the new, unprogrammed key fob into the ignition switch. Turn the ignition switch to the ON position. Wait for about 10 seconds. You should hear a single chime. The Vehicle Security Light will stop flashing, then illuminate steadily for three seconds, and finally turn off completely. This sequence confirms that your new key fob has been successfully programmed to your 2009 Chrysler 300.
This programming procedure not only programs the key to start your vehicle but also programs the Remote Keyless Entry (RKE) transmitter functions, allowing you to lock, unlock, and use other remote features with your new fob. You can repeat these steps to program up to a total of eight key fobs for your 2009 Chrysler 300.
What If You Don’t Have Two Working Keys?
If you don’t have two valid key fobs to begin with, the DIY programming method described above will not work. In this situation, you have a couple of reliable options to get your new 2009 Chrysler 300 key fob programmed:
-
Professional Locksmith: Automotive locksmiths specialize in car key programming and are often a more convenient and cost-effective alternative to dealerships. They possess the necessary tools and expertise to program key fobs even without existing working keys. To find a qualified locksmith in your area, visit LocateALocksmith.com.
-
Key Programmer Device: For those who prefer a DIY approach or need to program keys frequently, purchasing a key programmer can be a worthwhile investment. These devices allow you to program key fobs yourself, even if you only have one or no existing keys. You can explore key programmers and compatible keys for your 2009 Chrysler 300 at Click Here to Buy a Programmer and Key.
Conclusion
Programming a 2009 Chrysler 300 key fob can be a simple process if you have two existing working keys. By following these steps, you can quickly add a new key fob to your vehicle. However, if you lack two working keys, professional locksmith services or a key programmer device are readily available solutions to ensure you regain full access and convenience for your Chrysler 300.
