Are you looking to program a new key fob for your 2009 Chrysler Town & Country? It’s a common need when you get a replacement key or want an extra remote for convenience. Luckily, if you have two working key fobs, you can easily program a new one yourself right at home. This guide will walk you through the steps to program your 2009 Chrysler Town and Country key fob, saving you a trip to the dealership.
Step-by-Step Programming Instructions with Two Existing Keys
This method works if you currently possess two valid, programmed key fobs for your 2009 Chrysler Town & Country. Follow these instructions carefully to successfully program a new key fob:
-
Insert and Turn First Valid Key: Take one of your currently working key fobs and insert it into the ignition switch. Turn the ignition to the ON position. Make sure to hold it in this “ON” position for a minimum of three seconds, but do not leave it for longer than 15 seconds.
-
Turn Off and Remove First Key: After holding the first key in the “ON” position for the specified time, turn the ignition switch back to the LOCK/OFF position. Remove the first key fob from the ignition.
-
Insert and Turn Second Valid Key: Immediately, within 15 seconds of removing the first key, insert your second working key fob into the ignition switch. Turn the ignition to the ON position again.
-
Wait for Chime and Security Light: Keep the second key in the “ON” position. After approximately 10 seconds, you may hear a chime sound. You will also notice the Vehicle Security Light starting to flash.
-
Turn Off and Remove Second Key: Once you hear the chime and see the security light flashing, turn the ignition switch back to the LOCK/OFF position. Remove the second key fob from the ignition.
-
Insert and Turn NEW Key: Now, within 60 seconds, insert the new key fob that you want to program into the ignition switch. Turn the ignition to the ON position.
-
Confirmation Chime and Light: After about 10 seconds, you should hear a single chime. The Vehicle Security Light will stop flashing, turn on again for three seconds, and then turn off completely. This sequence confirms that your new key fob has been successfully programmed to your 2009 Chrysler Town & Country.
Your new key fob is now programmed! The Remote Keyless Entry (RKE) transmitter functions will also be programmed during this procedure, so you can use the remote buttons as well. You can repeat this entire process to program up to a total of eight key fobs for your vehicle.
Important Considerations and Limitations
-
Two Valid Keys Required: This DIY programming method only works if you have two already programmed and working key fobs. If you have lost both or only have one functioning key, you will not be able to program a new key fob yourself using this method.
-
Dealer Programming for Single or No Keys: If you only have one existing key fob, or if you have lost all of your key fobs, you will need to visit an authorized Chrysler dealer or a qualified automotive locksmith. They have specialized equipment to program new key fobs when you don’t have two working ones.
-
One-Time Programming: Keep in mind that once a new RKE fobik (key fob) has been programmed to your vehicle, it cannot be reprogrammed to another vehicle in the future. It is permanently linked to your specific 2009 Chrysler Town & Country.
Need Professional Key Fob Programming?
If you are having trouble programming your key fob using these instructions, or if you don’t have two working keys and need professional assistance, we can help you find a local key fob programming service. Enter your city name or zip code in the search box below to locate a professional installer in your area who can program your 2009 Chrysler Town & Country key fob for you.
