2009 Scion xB Key Fob Programming Instructions

Programming your 2009 Scion Xb Key Fob at home is a straightforward process that can save you time and money. This guide provides simple, step-by-step instructions to program your key fob remote yourself. Whether you’re replacing a lost fob or adding an extra one, follow these directions to get your keyless entry system working again quickly.

Before you begin, ensure you have all necessary remotes for your 2009 Scion xB on hand, as you will need to program all of them during this process. Let’s get started and program your 2009 Scion xB key fob.

Step-by-Step Guide to Program Your 2009 Scion xB Key Fob

Follow these instructions carefully to successfully program your 2009 Scion xB key fob:

  1. Start with Key and Door: Make sure the key is out of the ignition. Open and unlock only the driver’s side door, and close all other doors, including the trunk or hatchback.

  2. Insert and Remove Key (Twice): Within 5 seconds of opening the driver’s door, insert the key into the ignition and pull it out twice in rapid succession.

  3. Close and Open Driver’s Door (Twice): Immediately after step 2, close and then open the driver’s side door twice.

  4. Insert and Remove Key (Once): Insert the key into the ignition and then remove it one time.

  5. Close and Open Driver’s Door (Twice Again): Close and then open the driver’s side door two more times.

  6. Insert and Leave Key in Ignition: Insert the key into the ignition and this time, leave it in the ignition cylinder.

  7. Close Driver’s Door: Close the driver’s side door.

  8. Ignition ON then OFF: Turn the ignition switch to the ON position, and then immediately turn it back to the OFF position.

  9. Remove Key from Ignition: Take the key out of the ignition.

  10. Locks Cycle: You should now observe the door locks cycling (locking and unlocking automatically). This indicates that your 2009 Scion xB has successfully entered programming mode.

  11. Program First Remote: On the first key fob you wish to program, press and hold both the LOCK and UNLOCK buttons simultaneously for about 1.5 seconds. After releasing both, immediately press and hold only the LOCK button for 2 seconds.

  12. Locks Cycle Again (Confirmation): The door locks will cycle once more to confirm that the remote has been successfully programmed. If you have additional key fobs to program, repeat step 12 for each additional remote.

  13. Open Driver’s Door to Finish: Once you have programmed all desired remotes, open the driver’s side door. This action completes the programming sequence.

Need Professional Key Fob Programming Assistance?

If you encounter any difficulties programming your 2009 Scion xB key fob, or if you prefer professional assistance, there are services available to help. You can easily find a local key fob programming service in your area by searching online. Many professional installers can program your key fob for you, ensuring proper functionality.

By following these steps, you should be able to program your 2009 Scion xB key fob quickly and efficiently. Enjoy the convenience of keyless entry once again!

Comments

No comments yet. Why don’t you start the discussion?

Leave a Reply

Your email address will not be published. Required fields are marked *