Lost your key fob or need to program a new one for your 2009 Chevrolet Silverado? Don’t worry, programming your key fob is a straightforward process you can do right at home. This guide provides comprehensive instructions for programming your 2009 Silverado key fob, ensuring you regain seamless access to your vehicle. Whether your Silverado is equipped with Driver Information Center (DIC) buttons or not, we’ve got you covered with easy-to-follow steps.
Programming Your 2009 Silverado Key Fob with Driver Information Center (DIC) Buttons
If your 2009 Chevy Silverado has Driver Information Center buttons on the steering wheel, follow these instructions to program your key fob:
-
Ignition ON: Insert your key into the ignition and turn it to the “ON” position. This is the position right before you crank the engine, allowing you to access the Driver Information Center.
-
Access Vehicle Information Menu: Use the vehicle information button, typically located on the steering wheel or instrument panel, to scroll through the Driver Information Center menus. Continue pressing the button until you see the message “PRESS TO RELEARN REMOTE KEY” displayed.
-
Initiate Relearn Mode: Once “PRESS TO RELEARN REMOTE KEY” is displayed, press the “set/reset” button. This button is usually located in the center of the instrument panel or near the DIC buttons. Pressing it will initiate the key fob relearning process, and the display should change to “REMOTE KEY LEARNING ACTIVE”. The vehicle is now in programming mode and ready to learn your key fob.
-
Program the First Key Fob: Take your key fob and simultaneously press and hold both the “lock” and “unlock” buttons. Keep both buttons pressed for approximately 15 seconds. After about 15 seconds, you should hear a chime sound. This chime indicates that the vehicle has successfully recognized and programmed your key fob.
-
Program Additional Key Fobs (Optional): If you have additional key fobs to program, repeat step 4 immediately. You can program up to a maximum of eight key fobs for your 2009 Chevrolet Silverado. Make sure to program all key fobs you intend to use during this step, as programming new ones may erase previously programmed fobs.
-
Exit Programming Mode: To exit the key fob programming mode, simply turn the ignition key to the “OFF” position and remove the key from the ignition.
-
Test Your Key Fob(s): Thoroughly test all programmed key fobs to ensure they are working correctly. Check all buttons: lock, unlock, and any other functions your key fob may have, like remote start or panic button.
Programming Your 2009 Silverado Key Fob Without Driver Information Center (DIC) Buttons
If your 2009 Chevy Silverado model does not have Driver Information Center buttons, you can still program your key fob using a slightly different procedure:
-
Vehicle in Park and Ignition ON: Ensure your Silverado is in Park (P) and insert the key into the ignition. Turn the ignition key to the “ON” position, which is as far as you can turn it without starting the engine.
-
Enter Relearn Mode via Odometer Reset Stem: Locate the trip odometer reset stem on your instrument cluster. Press and release this stem repeatedly until the Driver Information Center (even without dedicated buttons, there’s a basic display) shows “RELEARN REMOTE KEY”.
-
Activate Remote Learning: Once “RELEARN REMOTE KEY” is displayed, press and hold the trip odometer reset stem for approximately three seconds. After holding for three seconds, the message “REMOTE KEY LEARNING ACTIVE” will appear, indicating the vehicle is now in key fob programming mode.
-
Program the First Key Fob: Take your first key fob and simultaneously press and hold the “lock” and “unlock” buttons together for about 15 seconds. You will hear a chime sound after approximately 15 seconds, confirming that the key fob has been successfully programmed.
-
Program Additional Key Fobs (Optional): If you have more key fobs to program, immediately repeat step 4 for each additional key fob. Remember that a 2009 Silverado can accommodate up to eight key fobs.
-
Exit Programming Mode and Test: Turn the ignition key to the “OFF” position and remove the key to exit the programming mode. Test all programmed key fobs to verify they are functioning as expected.
Need a Replacement 2009 Silverado Key Fob?
If you need a replacement key fob for your 2009 Chevrolet Silverado, or an extra one, visit us at Keylessentryremotefob.com. We offer a wide selection of high-quality replacement key fobs and remotes for various makes and models, including the 2009 Chevy Silverado. Find the perfect key fob for your vehicle and enjoy the convenience of keyless entry once again!
These programming instructions are designed to be clear and easy to follow, enabling you to quickly program your 2009 Silverado key fob. By following these steps, you can save time and money by avoiding a trip to the dealership for key fob programming.
