Having a spare key fob for your 2010 Honda Fit is not just a convenience, it’s a necessity. Losing your only key can be a stressful and costly experience. Fortunately, programming a new key fob for your 2010 Honda Fit can be done at home, potentially saving you a trip and expense to the dealership. This guide will walk you through the process of programming a 2010 Honda Fit Key Fob, ensuring you have a reliable backup.
Programming Your 2010 Honda Fit Key Fob – Step-by-Step Guide
Before you begin, ensure you have your new, unprogrammed 2010 Honda Fit key fob and are near your vehicle. This process involves a series of timed steps, so it’s important to read through the instructions completely before starting.
Disabling the Memory Feature
To begin the programming sequence, you may need to disable the key fob’s memory feature. This is typically done by:
- Press and hold both the Lock and Unlock buttons on your existing remote simultaneously.
- Continue holding until the LED indicator light on the remote blinks twice. This indicates the memory feature is disabled and you can proceed with programming.
Programming the Remote Transmitter (Key Fob)
Now you can proceed with programming your 2010 Honda Fit key fob by following these steps precisely:
- Turn the ignition switch to the ON (II) position. (Do not start the engine).
- Within 1 to 4 seconds, press the Lock button on the key fob you are programming.
- Within 1 to 4 seconds, turn the ignition switch to the OFF position.
- Within 1 to 4 seconds, turn the ignition switch to the ON (II) position again.
- Within 1 to 4 seconds, press the Lock button on the key fob.
- Within 1 to 4 seconds, turn the ignition switch to the OFF position.
- Within 1 to 4 seconds, turn the ignition switch to the ON (II) position once more.
- Within 1 to 4 seconds, press the Lock button on the key fob.
- Within 1 to 4 seconds, turn the ignition switch to the OFF position.
- Within 1 to 4 seconds, turn the ignition switch to the ON (II) position for the final time in this sequence.
- Within 1 to 4 seconds, press the Lock button on the key fob.
- Listen for the sound of the door lock actuators. Within 1 to 4 seconds of hearing the locks cycle, press the Lock button on the key fob again. This confirms the code is stored.
- If you have additional key fobs to program, within 10 seconds, press the Lock button on each subsequent key fob you wish to program. Listen for the door locks to cycle after pressing the lock button on each fob, confirming each is programmed.
- Turn the ignition switch to the OFF position and remove the key.
- Test the operation of all programmed key fobs to ensure they are working correctly by locking and unlocking the doors and activating any other remote functions.
Alt text: 2010 Honda Fit Key Fob – Follow our step-by-step guide to easily program your new Honda Fit key fob and gain keyless entry.
Immobilizer Chip Considerations
While the above steps program the remote functions of your 2010 Honda Fit key fob (lock, unlock, panic), they do not address the immobilizer chip. The immobilizer is a security feature that prevents the car from starting without the correct transponder chip programmed to the vehicle’s computer.
Typically, OEM keys purchased for your 2010 Honda Fit will come with an immobilizer chip that needs to be programmed separately to start the engine. The remote programming procedure outlined above will not program the immobilizer.
For immobilizer programming, you may need:
- Dealership Programming: The most reliable method is to have your new key, including the immobilizer chip, programmed at a Honda dealership. They have the necessary tools and equipment to ensure it’s done correctly.
- Professional Locksmith: Many automotive locksmiths also have the equipment to program immobilizer chips. This can sometimes be a more cost-effective alternative to the dealership.
- DIY Programming (Potentially Limited): Depending on the specific model and year of your 2010 Honda Fit, there might be DIY immobilizer programming methods available. However, these are less common and often require specialized tools or procedures. It’s crucial to research the specific immobilizer programming for your 2010 Honda Fit year and trim if you intend to attempt DIY immobilizer programming. Incorrect procedures can potentially cause issues with your vehicle’s security system.
Conclusion
Programming the remote functions of your 2010 Honda Fit key fob can often be accomplished at home using the steps outlined above. This can save you time and money on labor costs. However, remember that for full key functionality, including starting the engine, you will likely need to address the immobilizer chip separately, potentially requiring professional programming services from a dealership or qualified locksmith. Always test your newly programmed key fob thoroughly to ensure all functions are working as expected.
