Is your 2010 Chrysler Town and Country key fob malfunctioning, or do you need to program a new one? Fortunately, if you have two working key fobs, you can easily program a new one yourself right at home. This guide provides simple, step-by-step instructions to get your new key fob programmed and working with your vehicle quickly. If you’re looking for a replacement key fob, consider visiting Keylessentryremotefob.com for a wide selection.
2010 Chrysler Town and Country key fob replacement – Part number 56046708AA shown for reference.
DIY Key Fob Programming Instructions for Your 2010 Town & Country
This self-programming procedure is straightforward, provided you have two currently functioning key fobs. Here’s how to program your new 2010 Town and Country key fob:
-
Initial Key Insertion: Begin by inserting your first working key fob into the ignition. Turn the ignition to the “ON” position. Make sure to keep it in the “ON” position for a duration of at least 3 seconds, but do not exceed 15 seconds. After this time, turn the ignition back to the “LOCK/OFF” position and remove the key fob.
-
Second Key Activation: Within 15 seconds of removing the first key, insert your second, valid key fob into the ignition. Turn the ignition to the “ON” position again. Hold this position for approximately 10 seconds. You may hear a chime sound, and the Vehicle Security Light on your dashboard should start to flash. Once this occurs, turn the ignition to the “LOCK/OFF” position and remove the second key fob.
-
New Key Fob Programming: Now, within 60 seconds, insert the new, unprogrammed key fob into the ignition. Turn the ignition to the “ON” position. After about 10 seconds, you should hear a single chime. The Vehicle Security Light will stop flashing, illuminate steadily for about 3 seconds, and then turn off. This sequence indicates that your new key fob has been successfully programmed to your 2010 Chrysler Town and Country.
Important Considerations After Programming
-
Remote and Key Integration: This programming procedure not only programs the key to start your vehicle but also programs the Remote Keyless Entry (RKE) transmitter functions. This means your remote lock, unlock, and panic buttons should now be active on the newly programmed fob.
-
Programming Limits: You can repeat this process to program up to a total of eight key fobs for your vehicle.
-
Lost or Missing Valid Keys: If you only have one working key fob, or if you’ve lost all of your key fobs, this DIY programming method will not work. In these situations, you will need to visit an authorized Chrysler dealer or a qualified automotive locksmith for professional key fob programming services. They have specialized equipment to program your key fob even without existing valid keys.
-
One-Time Programming: Keep in mind that once a new RKE fobik has been programmed to your vehicle, it cannot be reprogrammed for use with another vehicle. This is a security feature to prevent key fob theft and reuse.
By following these steps, you can easily program a new key fob for your 2010 Chrysler Town and Country, saving you time and money. For replacement key fobs and other automotive key solutions, remember to visit Keylessentryremotefob.com. If you encounter any issues, consulting your local dealer or a professional locksmith is always recommended.
