Are you looking to program a new key fob for your 2011 Dodge Avenger? This guide provides simple instructions to program your key fob yourself, saving you time and money. If you already have two working key fobs, you can easily program a new one in just a few minutes. Follow these steps to program your 2011 Dodge Avenger key fob.
Prerequisites Before You Begin
Before starting the programming procedure, ensure you meet these crucial requirements:
- Two Working Key Fobs: This procedure is specifically for adding a third key fob. It requires you to have two already programmed and functioning key fobs.
- New, Unprogrammed Key Fob: You will need a new, uncut key fob that is compatible with your 2011 Dodge Avenger. Ensure it’s the correct type for your vehicle.
- Vehicle Built for the USA Market: This programming method is confirmed to work for Dodge Avengers manufactured for the US market.
If you only have one working key fob or none, this DIY programming method will not work. In such cases, you will need to visit a professional locksmith or dealership to have your key fob programmed.
Step-by-Step Programming Instructions
Follow these steps carefully to program your 2011 Dodge Avenger key fob:
-
Initial Key Activation: Insert your first working programmed key fob into the ignition. Turn the ignition to the ON position. Do not start the engine. Keep the ignition in the ON position for 5 seconds, then turn it OFF and remove the key fob.
-
Second Key Confirmation: Within 5 seconds of removing the first key, insert your second working programmed key fob into the ignition. Turn the ignition to the ON position again, without starting the engine. You should observe the security light on your dashboard begin to flash. In some models, you may also hear a chime sound within approximately 10 seconds. Once you see the flashing security light and/or hear the chime, turn the ignition OFF and remove the second key fob.
-
New Key Fob Programming: Immediately, within 5 seconds, insert your new, unprogrammed key fob into the ignition. Turn the ignition to the ON position (do not start the engine). The security light should start flashing again. Within 10 seconds, you should hear a chime, and the security light should turn off. This indicates that the new key fob has been successfully programmed. Turn the ignition OFF and remove the new key fob.
-
Testing the New Key Fob: Thoroughly test the newly programmed key fob. Try to start your 2011 Dodge Avenger and test all the remote functions, such as locking and unlocking the doors, and the panic button.
Troubleshooting and Professional Help
If you encounter difficulties programming your key fob, double-check that you have followed each step precisely and meet all the prerequisites. If you only have one working key fob or are still unable to program a new one, it’s recommended to seek professional help.
For professional key fob programming services, you can search for a local locksmith specializing in automotive key programming. They have the necessary tools and expertise to program your 2011 Dodge Avenger key fob, even if you don’t have two working keys.
Find a local key fob programming professional to assist you with your 2011 Dodge Avenger Key Fob Programming needs.
