Lost your 2011 Chevy Tahoe key fob or need to reprogram a new one? Don’t worry, keyfobprog.com is here to help! As your automotive key and remote experts, we’ll walk you through the simple steps to reprogram your 2011 Tahoe Key Fob yourself. This guide provides two methods, depending on whether your Tahoe is equipped with Driver Information Center (DIC) buttons on the steering wheel.
Method 1: Reprogramming Your 2011 Tahoe Key Fob with DIC Buttons
If your 2011 Tahoe has DIC buttons, follow these instructions to relearn your remote key:
-
Start the Relearn Process: Press the vehicle information button on your steering wheel repeatedly until you see “PRESS V TO RELEARN REMOTE KEY” displayed in the DIC.
-
Activate Learning Mode: Press the set/reset button (often a checkmark or set button) until the DIC displays “REMOTE KEY LEARNING ACTIVE”. The vehicle is now ready to learn the new key fob.
-
Program the First Key Fob: Take your first 2011 Tahoe key fob. Simultaneously press and hold both the lock and unlock buttons for approximately 15 seconds. You should hear a chime sound, indicating that the transmitter is successfully matched to your vehicle.
-
Program Additional Key Fobs (Optional): If you have additional 2011 Tahoe key fobs to program, repeat Step 3 immediately. Remember, you must program all key fobs you want to use in one session, up to a maximum of eight.
-
Exit Programming Mode: To finish the key fob programming, turn the ignition key to the LOCK position. This will exit the relearn mode.
Method 2: Reprogramming Your 2011 Tahoe Key Fob Without DIC Buttons
For 2011 Tahoe models without DIC buttons on the steering wheel, use this procedure:
-
Vehicle in Park: Ensure your 2011 Chevy Tahoe is in PARK (P) before starting the process.
-
Initiate Relearn via Odometer Stem: Press the trip odometer reset stem (the small button protruding from the instrument cluster) repeatedly until “RELEARN REMOTE KEY” is displayed.
-
Enter Learning Mode: Press and hold the trip odometer reset stem for about three seconds. The message “REMOTE KEY LEARNING ACTIVE” will appear, indicating the system is in programming mode.
-
Program the First Key Fob: Take your first 2011 Tahoe key fob. Press and hold the lock and unlock buttons on the key fob at the same time for roughly 15 seconds. A chime will sound to confirm the key fob is programmed.
-
Program Additional Key Fobs (Optional): If you have more key fobs for your 2011 Tahoe, repeat Step 4 right away. All key fobs need to be programmed during the same session.
-
Exit Programming: Turn the ignition key to the LOCK position to exit the key fob programming mode.
Important Note: When reprogramming your 2011 Tahoe key fob, it’s crucial to program all of your remotes (both new and existing) in a single programming session. If you don’t, any previously programmed key fobs will no longer work with your vehicle. Make sure to have all your 2011 Tahoe key fobs ready before you begin the relearning process and program them one after another without restarting the procedure.
By following these steps from keyfobprog.com, you can easily reprogram your 2011 Tahoe key fob and regain full remote access to your vehicle!
