Losing or needing to replace your 2013 Acura Tl Key Fob can be a frustrating experience. Fortunately, programming a new or existing key fob for your Acura TL can often be done yourself, saving you time and money compared to dealership programming fees. This comprehensive guide will walk you through the process of programming your 2013 Acura TL key fob, ensuring you regain seamless access to your vehicle.
Step-by-Step Programming Guide for Your 2013 Acura TL Key Fob
Before you begin, ensure all doors, the hood, and the trunk lid of your 2013 Acura TL are properly closed. This is crucial for the programming sequence to initiate correctly. It is also important to perform each step within the specified time frame of 1 to 4 seconds to avoid resetting the process.
-
Turn the Ignition ON (Position II): Insert your key into the ignition switch and turn it to the ON position (Position II). This is the position right before you would start the engine. Ensure that you do not start the engine, simply turn the ignition to the ‘ON’ position, where the car’s electronics are active.
-
Press Lock or Unlock Button (Within 1-4 Seconds): Immediately after turning the ignition ON, within 1 to 4 seconds, take your 2013 Acura TL key fob and aim it at the keyless receiver unit. This unit is typically located behind the driver’s side of the dashboard. Press either the lock or unlock button on the key fob. This action signals to the car’s system that you are initiating the key fob programming sequence.
-
Turn the Ignition OFF (Within 1-4 Seconds): Within another 1 to 4 seconds after pressing the key fob button, quickly turn the ignition switch back to the OFF position. This step is part of the timing sequence that puts the vehicle into programming mode.
-
Turn the Ignition ON Again (Within 1-4 Seconds): Again, within 1 to 4 seconds of turning the ignition OFF, turn it back to the ON position (Position II). Maintaining this rhythm and timing is critical for successful programming.
-
Press Lock or Unlock Button Again (Within 1-4 Seconds): Within 1 to 4 seconds of turning the ignition ON again, press the lock or unlock button on your 2013 Acura TL key fob once more, aiming at the receiver unit.
-
Turn the Ignition OFF Again (Within 1-4 Seconds): Within 1 to 4 seconds, turn the ignition switch back to the OFF position.
-
Turn the Ignition ON Again (Within 1-4 Seconds): Repeat the process by turning the ignition switch to the ON position (Position II) within 1 to 4 seconds.
-
Press Lock or Unlock Button Again (Within 1-4 Seconds): Press the lock or unlock button on the key fob again within 1 to 4 seconds, aiming at the receiver.
-
Turn the Ignition OFF Again (Within 1-4 Seconds): Turn the ignition switch to the OFF position within 1 to 4 seconds.
-
Turn the Ignition ON Again (Within 1-4 Seconds): Turn the ignition switch to the ON position (Position II) for the final time in this sequence, within 1 to 4 seconds.
-
Press Lock or Unlock Button Again (Within 1-4 Seconds): For the last time in this sequence, press the lock or unlock button on the key fob within 1 to 4 seconds, aiming at the receiver unit.
-
Confirm Door Lock Actuator Sound (Within 1-4 Seconds): Listen carefully for the sound of the door lock actuators. Within 1 to 4 seconds, you should hear the doors lock and unlock, indicating that the system has entered programming mode. Immediately after hearing this confirmation, press the lock or unlock button on the key fob once more. This second press is essential to store the key fob code into the system’s memory. If you do not press the button again after hearing the actuator sound, the programming will not be saved.
-
Program Additional Key Fobs (Within 10 Seconds): If you have additional 2013 Acura TL key fobs to program (up to two more), you have 10 seconds to program them. Aim each additional key fob at the keyless receiver and press the lock or unlock button. You should hear the door lock actuators respond after each successful key fob code is stored, confirming each key fob is programmed.
-
Turn the Ignition OFF and Remove Key: After you have programmed all desired key fobs, turn the ignition switch to the OFF position and remove the key from the ignition. This action exits the programming mode.
-
Test Key Fobs for Proper Operation: Finally, test each programmed 2013 Acura TL key fob to ensure they are working correctly. Try locking and unlocking the doors, activating the panic alarm, and any other functions your key fob supports to confirm successful programming.
By following these steps carefully and maintaining the correct timing, you should be able to successfully program your 2013 Acura TL key fob. If you encounter issues, double-check each step and ensure you are within the 1 to 4 second time limit for each action. If problems persist, it may be necessary to consult with a professional locksmith or your Acura dealership for further assistance.
