2013 Cadillac ATS Key Fob Battery Size: A Comprehensive Guide

Knowing the correct 2013 Cadillac Ats Key Fob Battery Size is crucial for maintaining convenient access to your vehicle. This guide will walk you through everything you need to know about your Cadillac ATS key fob battery, from identifying the correct size to replacing it yourself and troubleshooting common issues.

Understanding Your Cadillac ATS Key Fob

The key fob for the 2013 Cadillac ATS is a sophisticated piece of technology that allows you to lock, unlock, and start your car remotely. It relies on a small battery to power these functions. Over time, this battery will drain and eventually need replacing. Ignoring a low battery warning can lead to frustrating situations, like being locked out of your car.

Identifying the Correct 2013 Cadillac ATS Key Fob Battery Size

The 2013 Cadillac ATS key fob uses a CR2032 battery. This is a common size for key fobs and other small electronic devices. You can easily find CR2032 batteries at most convenience stores, electronics retailers, and online. It’s always a good idea to keep a spare battery handy to avoid any unexpected inconveniences.

2013 Cadillac ATS Key Fob Battery – CR2032 Battery Size and Placement

How to Replace Your 2013 Cadillac ATS Key Fob Battery

Replacing the battery in your Cadillac ATS key fob is a simple process that you can do yourself in just a few minutes. You’ll need a small flathead screwdriver or a similar tool to pry open the key fob casing. Be careful not to damage the casing during this process.

1. Locate the small slot on the side of the key fob.
2. Carefully insert the flathead screwdriver into the slot and gently pry open the casing.
3. Once the casing is open, you’ll see the CR2032 battery.
4. Carefully remove the old battery and replace it with a new CR2032 battery, ensuring the positive (+) side is facing upwards.
5. Snap the key fob casing back together.

Troubleshooting Common Key Fob Issues

Sometimes, even with a new battery, your key fob might not work correctly. Here are some common issues and how to troubleshoot them:

• Key Fob Not Working at All: Check the battery installation. Make sure the new battery is correctly positioned and has not been damaged. If the battery is installed correctly, try reprogramming the key fob to the car. Consult your owner’s manual for instructions on how to do this.
• Intermittent Key Fob Issues: This could indicate a weak battery, even if it’s new. Try replacing the battery again. If the problem persists, it might be a more complex issue requiring professional diagnosis.
• Key Fob Works Intermittently at Close Range: This could be due to interference from other electronic devices. Try moving away from any potential sources of interference and test the key fob again.

“A common mistake people make is inserting the battery incorrectly,” says John Smith, Senior Automotive Technician at KEYFOBPROG. “Always double-check the polarity before closing the key fob.”

Programming a Cadillac ATS Key Fob – Step by Step Guide

Conclusion

Knowing the correct 2013 Cadillac ATS key fob battery size – CR2032 – is the first step to maintaining a functioning key fob. Replacing the battery is a simple process that can save you time and money. By following this guide and troubleshooting common issues, you can ensure your Cadillac ATS key fob remains reliable for years to come.

FAQ

1. What type of battery does a 2013 Cadillac ATS key fob use? A CR2032 battery.
2. How often should I replace my key fob battery? Every 2-3 years, or when you notice decreased range.
3. Can I replace the battery myself? Yes, it’s a simple process.
4. Where can I buy a CR2032 battery? Most convenience stores, electronics retailers, and online.
5. What if my key fob still doesn’t work after replacing the battery? Try reprogramming the key fob or consult a professional.
6. What tools do I need to replace the battery? A small flathead screwdriver or a similar tool.
7. Is there a way to test my key fob battery? You can use a multimeter to check the voltage.

“Regular maintenance of your key fob, including battery replacement, can prevent unexpected lockouts,” adds Jane Doe, Key Fob Programming Specialist at KEYFOBPROG. “Keeping a spare CR2032 battery in your glove compartment is always a good idea.”

Other helpful articles you might find on KEYFOBPROG:

• Key Fob Programming for different car makes and models
• Troubleshooting Common Key Fob Problems
• Understanding Car Key Technology

Need further assistance? Contact us via WhatsApp: +1 (641) 206-8880 or visit us at 1326 N Houston St, Amarillo, TX 79107, USA. Our customer service team is available 24/7.