2013 Hyundai Veloster Trunk Release Mechanism Diagram

2013 Hyundai Veloster Won’t Open Trunk From Key Fob

If your 2013 Hyundai Veloster’s trunk refuses to budge when you press the key fob button, you’re not alone. This is a common issue that can be caused by a variety of factors, from a dead key fob battery to a faulty actuator. This guide will walk you through the most common causes and provide solutions so you can get your trunk open again.

Common Reasons Why Your 2013 Hyundai Veloster Trunk Won’t Open with the Key Fob

There are several reasons why your 2013 Hyundai Veloster trunk might not be cooperating with your key fob. Let’s explore some of the usual suspects.

Dead Key Fob Battery

One of the simplest explanations is a dead key fob battery. If your key fob isn’t working at all (not just for the trunk), this is a likely culprit. Replacing the battery is a cheap and easy fix that you can often do yourself.

Faulty Trunk Release Switch

The trunk release switch, either on your key fob or inside the car, could be malfunctioning. Over time, these switches can wear out or become damaged, preventing them from sending the signal to open the trunk.

Blown Fuse

A blown fuse in your car’s electrical system can also cause the trunk release to stop working. Checking the fuse box and replacing any blown fuses related to the trunk release is a relatively easy DIY fix.

Wiring Issues

Damaged or corroded wiring between the key fob receiver, the trunk release switch, and the trunk actuator can disrupt the signal and prevent the trunk from opening.

Faulty Trunk Actuator

The trunk actuator is the mechanism that physically unlocks the trunk latch. If the actuator is faulty, the trunk won’t open even if the signal is being sent correctly.

2013 Hyundai Veloster Trunk Release Mechanism Diagram2013 Hyundai Veloster Trunk Release Mechanism Diagram

Troubleshooting Your 2013 Hyundai Veloster Trunk Release

Now that we’ve identified the potential culprits, let’s dive into some troubleshooting steps.

  1. Check the Key Fob Battery: Replace the key fob battery with a new one. This is the easiest fix and often solves the problem.

  2. Test the Trunk Release Switch (Inside the Car): Try opening the trunk using the release button inside the car. If this works, the issue is likely with the key fob itself, not the trunk release mechanism.

  3. Check the Fuses: Locate your car’s fuse box (usually under the dashboard or in the engine compartment) and consult your owner’s manual to identify the fuse related to the trunk release. If the fuse is blown, replace it with a new one of the same amperage.

Hyundai Veloster Fuse Box Diagram and LocationHyundai Veloster Fuse Box Diagram and Location

  1. Inspect the Wiring: If you’re comfortable with some basic car maintenance, you can visually inspect the wiring connected to the trunk release mechanism for any signs of damage or corrosion. If you find any issues, repairing or replacing the wiring might be necessary.

  2. Test the Trunk Actuator: If all else fails, the trunk actuator itself may be faulty. You can test this by applying 12V directly to the actuator. If it doesn’t respond, it likely needs to be replaced.

Testing the Trunk Actuator on a 2013 Hyundai VelosterTesting the Trunk Actuator on a 2013 Hyundai Veloster

When to Seek Professional Help

While many of these troubleshooting steps can be done yourself, some may require the expertise of a qualified auto technician. If you’re not comfortable working on your car’s electrical system or if you’ve tried these steps and the trunk still won’t open, it’s best to take your 2013 Hyundai Veloster to a professional.

Conclusion

A malfunctioning trunk release on your 2013 Hyundai Veloster can be a frustrating issue. However, by following these troubleshooting steps, you can often identify the cause and fix the problem yourself. Remember, if you are unsure about anything, always consult a professional.

Professional Car Key Programming and Trunk Release RepairProfessional Car Key Programming and Trunk Release Repair

FAQs

  1. Can I program a new key fob myself? While possible with some models, it’s often best to have a professional program a new key fob for your 2013 Hyundai Veloster.

  2. How much does it cost to replace a trunk actuator? The cost can vary, but you can expect to pay between $100 and $300 for parts and labor.

  3. Where can I find the fuse box diagram for my 2013 Hyundai Veloster? Your owner’s manual should contain a detailed fuse box diagram.

  4. What is the most common reason for a 2013 Hyundai Veloster trunk not opening with the key fob? A dead key fob battery is often the culprit.

  5. Can I still open the trunk manually if the key fob isn’t working? Yes, most cars have an emergency trunk release lever located inside the trunk, accessible through the back seats. Check your owner’s manual for the exact location in your 2013 Hyundai Veloster.

  6. How long does a key fob battery typically last? Key fob batteries usually last between 3 and 5 years.

  7. What type of battery does the 2013 Hyundai Veloster key fob use? The 2013 Hyundai Veloster key fob typically uses a CR2032 battery.

Common Situations and Questions

Scenario: The key fob works intermittently. Possible Cause: Weak battery, faulty key fob, or wiring issues.

Scenario: The trunk opens with the inside release button but not the key fob. Possible Cause: Faulty key fob or programming issue.

Scenario: Nothing happens when I press the trunk release button on the key fob or inside the car. Possible Cause: Blown fuse, faulty actuator, or wiring problem.

Related Articles on KEYFOBPROG

  • Key Fob Programming Guide
  • Troubleshooting Car Key Issues
  • Understanding Your Car’s Electrical System

Need Help? Contact us on WhatsApp: +1 (641) 206-8880 or visit us at 1326 N Houston St, Amarillo, TX 79107, USA. We have a 24/7 customer support team ready to assist you.


Posted

in

by

Tags:

Comments

Leave a Reply

Your email address will not be published. Required fields are marked *