Replacing the Lexus IS250 Key Fob Battery

2013 Lexus IS250 Key Fob Battery: Replacement Guide and Troubleshooting

If you’re experiencing issues with your 2013 Lexus IS250 key fob, a dead battery might be the culprit. A malfunctioning key fob can lead to frustrating situations, from being unable to unlock your car to difficulty starting the engine. Luckily, replacing the key fob battery is a quick and easy task that can be done at home, saving you a trip to the dealership. This comprehensive guide will walk you through the process step-by-step and provide valuable troubleshooting tips.

Understanding Your Lexus IS250 Key Fob

The key fob for the 2013 Lexus IS250 is a sophisticated piece of technology that allows you to remotely control various functions of your vehicle, such as locking and unlocking doors, opening the trunk, and even starting the engine remotely. Over time, the battery that powers these functions will inevitably drain, requiring a replacement.

Signs of a Dying Key Fob Battery

Before you start disassembling your key fob, it’s essential to identify the symptoms of a dying battery. Here are some common signs:

  • Decreased Range: You might find yourself needing to be closer to your car for the key fob to work.
  • Intermittent Functioning: Buttons might work only sporadically or require multiple presses.
  • Warning Messages: Your Lexus might display a “Key Fob Battery Low” warning on the dashboard.
  • No Response: In extreme cases, your key fob might completely stop working.

What Type of Battery Does a 2013 Lexus IS250 Key Fob Use?

The 2013 Lexus IS250 key fob uses a CR2032 battery, a common type of lithium coin battery readily available at most electronics stores, auto parts shops, and online retailers.

How to Replace the Battery in Your 2013 Lexus IS250 Key Fob

Replacing the key fob battery is a straightforward process. Here’s a step-by-step guide:

  1. Locate the Emergency Key: On the back of your key fob, you’ll find a small release button or switch. Press it to release the emergency metal key.
  2. Open the Key Fob: Use the edge of the emergency key or a small flathead screwdriver to carefully pry open the key fob casing. Insert the key or screwdriver into the notch where the emergency key was released.
  3. Remove the Old Battery: Gently pry out the old CR2032 battery from its compartment. Take note of the battery’s orientation for correct replacement.
  4. Install the New Battery: Place the new CR2032 battery into the compartment, ensuring the positive (+) side faces up, just like the old battery.
  5. Reassemble the Key Fob: Align the two halves of the key fob casing and press them firmly together until you hear a click.
  6. Test the Key Fob: Check if all the buttons are functioning correctly.

 Replacing the Lexus IS250 Key Fob BatteryReplacing the Lexus IS250 Key Fob Battery

Troubleshooting Key Fob Issues

If replacing the battery doesn’t solve the problem, there might be other underlying issues. Here are a few troubleshooting steps:

  • Check Battery Contacts: Ensure the battery contacts inside the key fob are clean and free of corrosion. Use a cotton swab dipped in rubbing alcohol to clean them.
  • Inspect the Key Fob: Examine your key fob for any physical damage like cracks or broken buttons.
  • Reprogramming: In some cases, you might need to reprogram your key fob to your Lexus. Refer to your owner’s manual for instructions or seek professional help.

Professional Key Fob Programming and Replacement Services

While replacing the battery is a simple DIY task, certain situations might require professional assistance. If you encounter any of the following, consider contacting a qualified automotive locksmith or dealership:

  • Lost or Damaged Key Fob: If you lose your key fob or it’s damaged beyond repair, you’ll need a replacement programmed to your vehicle.
  • Programming Issues: If you’re unable to program a new key fob yourself, professionals have the necessary tools and expertise.
  • Immobilizer Problems: The immobilizer system in your Lexus works in tandem with your key fob. If there’s an issue, you’ll likely need professional help.

Professional Lexus Key Fob ProgrammingProfessional Lexus Key Fob Programming

Preventative Measures for Key Fob Longevity

  • Avoid Extreme Temperatures: Prolonged exposure to very hot or cold temperatures can affect battery life.
  • Handle with Care: Avoid dropping your key fob or subjecting it to impacts.
  • Regular Battery Checks: Consider proactively replacing the battery every year or two to prevent unexpected issues.

Conclusion

A malfunctioning key fob doesn’t have to be a major inconvenience. By following this guide, you can easily replace your 2013 Lexus Is250 Key Fob Battery and ensure the smooth operation of your vehicle’s keyless entry system. Remember, professional help is always available if you encounter any complications or require a new key fob. For other Lexus models and their key fob concerns, you can find helpful information on 2015 Lexus IS350 key fob, 2011 Lexus IS350 key fob, or learn more about the common issue of 2015 Lexus ES key fob battery cr2032. Additionally, we have a comprehensive guide on how to replace a Lexus key fob battery and information specific to the Lexus IS350 key fob battery replacement.

Need Help with Your Lexus Key Fob?

Contact us via WhatsApp at +1 (641) 206-8880 or visit us at 1326 N Houston St, Amarillo, TX 79107, USA. Our team is available 24/7 to assist you.


Posted

in

by

Tags:

Comments

Leave a Reply

Your email address will not be published. Required fields are marked *