2013 Subaru BRZ Key Fob Battery: Replacement Guide and Troubleshooting Tips

The key fob for your 2013 Subaru BRZ is a vital part of your daily drive, allowing you to conveniently lock, unlock, and even start your car remotely. However, like all battery-powered devices, the key fob’s lifespan is directly related to its battery life. Experiencing issues with your key fob? A dead or dying battery is often the culprit.

This comprehensive guide will walk you through everything you need to know about your 2013 Subaru Brz Key Fob Battery, from identifying the signs of a failing battery to replacing it yourself and troubleshooting common problems.

Signs Your 2013 Subaru BRZ Key Fob Battery Needs Replacing

Recognizing the early signs of a dying key fob battery can save you from the frustration of being stranded. Here are some common indicators:

  • Decreased Range: You find yourself standing closer to your car than usual to get it to respond to the key fob.
  • Intermittent Functioning: The key fob works sporadically, requiring multiple button presses or only functioning at close range.
  • No Response: Your car fails to respond to any key fob commands, even when standing right next to it.
  • Dashboard Warning Light: Some Subaru models may display a “Key Fob Battery Low” warning message on the dashboard.

Replacing Your 2013 Subaru BRZ Key Fob Battery: A Step-by-Step Guide

Replacing the battery in your 2013 Subaru BRZ key fob is a simple DIY task that can save you time and money. Here’s how:

What You’ll Need:

  • A new CR2032 battery (widely available at most stores)
  • A small flat-head screwdriver or a plastic pry tool

Instructions:

  1. Locate the Battery Compartment: On the back of your Subaru BRZ key fob, find the small release button or notch.
  2. Open the Key Fob: Gently press the release button or insert the flat-head screwdriver into the notch and carefully pry open the key fob casing.
  3. Remove the Old Battery: Carefully remove the old CR2032 battery. Note the battery’s orientation for correct placement of the new battery.
  4. Install the New Battery: Insert the new CR2032 battery into the compartment, ensuring it matches the same orientation as the old battery (+ side facing up).
  5. Close the Key Fob: Align the two halves of the key fob and press them firmly together until you hear a click, indicating it’s securely closed.

Programming Your 2013 Subaru BRZ Key Fob

In most cases, replacing the battery in your 2013 Subaru BRZ key fob does not require reprogramming. The key fob should automatically synchronize with your car once the new battery is installed.

Testing Your New Battery:

After replacing the battery, test all key fob functions (lock, unlock, panic, and trunk release) to ensure it’s working correctly.

Troubleshooting Common 2013 Subaru BRZ Key Fob Issues

While a dead battery is the most common key fob issue, you might encounter other problems. Here are some troubleshooting tips:

  • Key Fob Not Detected: Ensure the battery is installed correctly and try pressing the buttons multiple times. If the issue persists, you might need to reprogram the key fob to your car. Refer to your owner’s manual for specific programming instructions.
  • Keyless Entry Not Working: Check your Subaru’s fuse box for any blown fuses related to the keyless entry system. Replace any blown fuses with ones of the same amperage.
  • Intermittent Issues: Interference from electronic devices or being in an area with strong radio frequencies can disrupt key fob signals. Try moving to a different location or turning off nearby electronics.

Expert Insights on Subaru Key Fobs

“Many car owners don’t realize how simple and cost-effective it is to replace their own key fob batteries. By following a few easy steps, you can avoid the inconvenience and expense of a trip to the dealership.” – John Smith, Senior Automotive Technician at KEYFOBPROG

Still Having Trouble? KEYFOBPROG Can Help!

If you’ve tried the troubleshooting steps above and are still experiencing issues with your 2013 Subaru BRZ key fob, it’s best to seek professional assistance. Our team at KEYFOBPROG specializes in automotive Key Fob Programming, replacement, and repair.

Contact us today for expert help with your 2013 Subaru BRZ key fob:

Whatsapp: +1 (641) 206-8880
Address: 1326 N Houston St, Amarillo, TX 79107, USA

Our dedicated customer service team is available 24/7 to answer your questions and schedule an appointment.


Posted

in

by

Tags:

Comments

One response to “2013 Subaru BRZ Key Fob Battery: Replacement Guide and Troubleshooting Tips”

  1. […] Knowing how to change your key fob battery is essential for every Subaru BRZ owner. A dead battery can leave you stranded, unable to lock or unlock your car, or even start the engine. Don’t let a dead battery ruin your day. 2013 subaru brz key fob battery […]

Leave a Reply

Your email address will not be published. Required fields are marked *