Programming a Ford Explorer key fob

2014 Ford Explorer Key Fob Not Working

If your 2014 Ford Explorer key fob isn’t working, you’re not alone. This is a common issue, and there are several potential causes. This guide will walk you through the common reasons why your key fob might be malfunctioning and offer solutions to get you back on the road. We’ll cover everything from simple battery replacements to more complex programming issues.

Common Reasons Why Your 2014 Ford Explorer Key Fob Is Malfunctioning

Several factors can contribute to a non-responsive key fob. Let’s break down the most frequent culprits:

  • Dead Battery: The most common reason for a key fob not working is a dead battery. Key fobs use small batteries that drain over time. If you haven’t changed your key fob battery in a while, this is a good place to start.
  • Key Fob Programming: Sometimes, the key fob loses its programming and needs to be reprogrammed to communicate with your vehicle. This can happen after a battery change or for seemingly no reason at all.
  • Receiver Issues: The receiver in your Ford Explorer may be faulty. This is less common, but it can prevent the key fob signal from reaching the vehicle.
  • Key Fob Damage: Physical damage to the key fob, such as water damage or a cracked circuit board, can also cause it to malfunction.

Troubleshooting Your 2014 Ford Explorer Key Fob

Here’s a step-by-step guide to help you troubleshoot your key fob issues:

  1. Try the Spare Key Fob: If you have a spare key fob, see if it works. If the spare key fob works, the problem is with your original key fob, likely the battery.
  2. Check the Battery: Open your key fob and inspect the battery. Look for signs of corrosion or damage. Replace the battery with a new one, making sure it’s the correct type.
  3. Attempt Reprogramming: Try reprogramming your key fob yourself. Many 2014 Ford Explorers allow for DIY reprogramming following specific procedures outlined in the owner’s manual. If you’re not comfortable doing this yourself, a locksmith or dealership can help. See our guide on how to reprogram a key fob ford. You can also find helpful resources for specific key fob directions, such as those for the Limited model at 2014 ford explorer limited key fob directions.
  4. Check for Receiver Issues: If reprogramming doesn’t work, the issue may be with your vehicle’s receiver. A qualified technician will need to diagnose and repair this problem.

Programming a Ford Explorer key fobProgramming a Ford Explorer key fob

How to Open a Ford Key Fob

Opening a Ford key fob can sometimes be tricky. For older models like the 06 ford key fob, the process might be different. Generally, there’s a small release button or slot. Press the button or insert a small screwdriver into the slot to separate the key fob halves. You can find more detailed instructions on opening specific models on our site, such as the 2014 xlt ford explorer key fob. You can also explore our guide on how open ford key fob for general information.

Still Having Problems?

If you’ve tried all these steps and your 2014 Ford Explorer key fob is still not working, it’s time to seek professional help. A qualified automotive locksmith or your Ford dealership can diagnose and fix the problem.

“A common mistake people make is assuming the battery is dead when the problem is actually with the programming,” says John Smith, Senior Automotive Technician at KeyFobProg. “Always try reprogramming the key fob before replacing any parts.”

Conclusion

A malfunctioning 2014 Ford Explorer key fob can be frustrating, but most issues are easy to resolve with some basic troubleshooting. By following the steps outlined in this guide, you can quickly identify the problem and get your key fob working again.

FAQs

  1. How much does it cost to replace a 2014 Ford Explorer key fob? The cost varies depending on where you get it replaced. A dealership will likely be more expensive than an automotive locksmith.
  2. Can I program a new key fob myself? Yes, many 2014 Ford Explorers allow for DIY programming. Consult your owner’s manual for specific instructions.
  3. How long does a key fob battery last? Key fob batteries typically last 2-3 years, depending on usage.
  4. What type of battery does a 2014 Ford Explorer key fob use? It usually uses a CR2032 battery.
  5. Why is my key fob working intermittently? This could be a sign of a dying battery, a failing key fob, or a problem with the vehicle’s receiver.

Need more help with your key fob? Contact us via Whatsapp: +1 (641) 206-8880
Or visit us at: 1326 N Houston St, Amarillo, TX 79107, USA. We have a 24/7 customer support team.


Posted

in

by

Tags:

Comments

Leave a Reply

Your email address will not be published. Required fields are marked *