Is your 2014 Chevy Silverado key fob looking a little worse for wear? Maybe it feels cheap or outdated compared to the rest of your truck. Many Silverado owners feel the same way. The good news is you don’t have to live with a basic key fob. Upgrading to a more stylish or simply newer case is a straightforward DIY project. This guide will walk you through a simple 2014 Silverado Key Fob Case Replacement, allowing you to refresh your fob without expensive dealership programming.
Thinking about enhancing your 2014 Silverado? A key fob case replacement is a small but impactful upgrade. Let’s dive into how you can easily swap out your old case for a new one, giving your key fob a much-needed refresh.
Tools You’ll Need
Before you begin your 2014 Silverado key fob case replacement, gather these simple tools:
- #0 Philips screwdriver: Essential for accessing the internal components of the key fob. A small, round object might also work effectively.
- Small flat blade screwdriver (m1.8 or similar): Crucial for carefully prying open the new key fob case, especially the chrome trim.
- Penny: Surprisingly effective for popping open the back of the original key fob case without causing damage.
Step-by-Step Guide to Replacing Your 2014 Silverado Key Fob Case
Follow these easy steps to perform your 2014 Silverado key fob case replacement:
Step 1: Opening the Original Key Fob
First, we’ll disassemble your old key fob.
-
Pop the back cover: Use the penny to gently pry open the back of your old key fob. Insert the edge of the penny into the seam and twist slightly until the cover pops off.
-
Remove the battery: Once the back cover is off, you’ll see the battery. Carefully remove it and set it aside.
-
Separate the case halves: Locate the small holes on the sides of the key fob case. Using your #0 Philips screwdriver (or a similar rounded tool), gently push into one of these holes. Apply firm, straight pressure – avoid twisting. This will pop open the edge of the case. Repeat on the other hole.
-
Open the case: After using the screwdriver in both holes, you should be able to pull the two halves of the case apart with your fingers. They should pop open relatively easily.
-
Remove the circuit board: Turn the opened key fob housing over and gently shake it. The circuit board should fall out as it’s not attached to the case. Set the board aside carefully – this is the programmed component you need to keep. Also set aside the old key fob case parts.
Step 2: Disassembling the New Key Fob Case
Now, let’s prepare your new key fob case for the swap.
-
Open the new fob and remove the battery: Just like with the old fob, use the penny to open the back of the new key fob case and remove the battery.
-
Remove the chrome trim: This is the trickiest part of the 2014 Silverado key fob case replacement. The chrome side pieces on the new fob case are solid and hold the case halves together. Incorrect removal can damage the case. Turn the new fob face down. Using your small flat blade screwdriver (m1.8), carefully insert the blade under the chrome edging in the area shown in the image. Gently pry one end loose, and hold it firmly so it doesn’t snap back into place. Then, pry the other end loose and remove the chrome piece. Repeat this process for the chrome piece on the other side of the fob.
-
Separate the new case halves: Once the chrome trim is removed, you’ll see small plastic tabs along the edges of the case. Gently use your flat blade screwdriver to pry these tabs back, and then pull the two halves of the new key fob case apart.
-
Remove the new circuit board: The new circuit board, which is unprogrammed, will fall out just like the old one. You won’t need this new board for your 2014 Silverado key fob case replacement, so set it aside. You can keep it as a spare or discard it.
Step 3: Swapping and Reassembling
You’re now ready to complete the 2014 Silverado key fob case replacement by swapping the circuit boards and reassembling the new case.
-
Insert your old circuit board: Take the programmed circuit board from your old key fob and place it into the new key fob case. It should fit perfectly into the designated space.
-
Snap the new case back together: Carefully align the two halves of the new key fob case and snap them back together. Ensure they are firmly closed.
-
Reinstall the chrome trim: If your new case has chrome trim, carefully snap it back into place on both sides of the fob.
-
Reinstall the battery and back cover: Place the battery back into the new key fob case, ensuring correct polarity. Then, snap the back cover back onto the case until it clicks securely.
-
Test your new fob: Test all the buttons on your newly assembled key fob to ensure everything works correctly. Your 2014 Silverado key fob case replacement is now complete!
You’ve successfully upgraded your 2014 Silverado key fob case yourself! No need to be embarrassed by a basic fob any longer. Enjoy the refreshed look and feel of your upgraded key fob.
