Is your 2014 Subaru Impreza key fob not working as reliably as it used to? Perhaps you’re finding you need to be closer and closer to your vehicle for it to unlock, or maybe it’s stopped working altogether. In many cases, the culprit is simply a dead battery in your key fob. Don’t worry, replacing the battery in your 2014 Subaru Impreza key fob is a straightforward process you can easily handle yourself. While you can always schedule a service appointment, this guide will walk you through replacing your Subaru key fob battery quickly and efficiently.
Step-by-Step Guide to Replacing Your 2014 Subaru Impreza Key Fob Battery
For the 2014 Subaru Impreza, and many other Subaru models around that year, the key fob typically has a bulging rectangular shape. This type of key fob is designed for easy battery replacement. You’ll only need a few minutes and a common household tool.
Here’s how to replace the battery in your 2014 Subaru Impreza key fob:
What you will need:
- A new CR2032 battery. This is the standard battery for the rectangular Subaru key fob. You can find these at most drug stores, supermarkets, and electronics stores.
- A small flathead screwdriver or a similar thin tool. This will help you gently pry open the key fob.
Steps:
-
Remove the Emergency Key: Locate the small silver tab on the back of your 2014 Subaru Impreza key fob. Press and hold this tab to release and remove the metal emergency key. Set the key aside in a safe place.
-
Open the Key Fob Casing: With the emergency key removed, you’ll see a seam running around the edge of the key fob. This is where you need to gently pry it open. Insert your flathead screwdriver (or thin tool) into this seam. Apply gentle pressure and twist the screwdriver to separate the two halves of the key fob casing. Work your way around the seam, carefully prying until the case splits open. Be patient and avoid using excessive force to prevent damaging the plastic casing.
-
Locate the Battery: Once the fob is open, you’ll see the internal components. The flat, round CR2032 battery will be visible. Depending on how the fob opens, it might be positioned on either side of the transmitter circuit board. Take note of the battery orientation – specifically, which side is facing upwards (usually the positive side marked with a “+”).
-
Remove the Old Battery: Gently release the old CR2032 battery. In some fobs, it might be held in place by small clips. You can usually use your fingertip or the tip of the screwdriver to nudge it loose.
-
Install the New Battery: Take your new CR2032 battery and carefully place it into the battery compartment. Ensure the correct side is facing upwards, matching the orientation of the old battery you just removed. Avoid touching the flat surfaces of the new battery with your fingers as much as possible; oils from your skin can reduce battery life. Ideally, handle it by the edges.
-
Reassemble the Key Fob: Carefully snap the two halves of the key fob casing back together. Press firmly around the edges until you hear or feel them click securely into place.
-
Re-insert the Emergency Key: Finally, slide the metal emergency key back into its slot until it clicks and locks securely.
Testing Your 2014 Subaru Impreza Key Fob
Once you have reassembled your key fob, test it to ensure the new battery is working. Press the lock and unlock buttons to see if your 2014 Subaru Impreza responds. If it does, you’ve successfully replaced your key fob battery!
What if Replacing the Battery Doesn’t Work?
If you’ve replaced the battery in your 2014 Subaru Impreza key fob and it’s still not functioning, there could be other issues. Here are a few possibilities:
- Incorrect Battery Type: Double-check that you used a CR2032 battery. While this is the standard for the rectangular fob, it’s always best to confirm.
- Key Fob Damage: If the key fob has been dropped or exposed to moisture, internal damage could be preventing it from working, even with a new battery.
- Key Fob Programming: In some rare cases, after a battery replacement, the key fob might need to be reprogrammed to your vehicle. However, for a 2014 Subaru Impreza, battery replacement usually doesn’t require reprogramming.
When to Seek Professional Help
If you’re still having trouble with your 2014 Subaru Impreza key fob after replacing the battery, or if you suspect damage, it’s best to consult with a Subaru specialist. Our service team at Keyfobprog.com are experts in Subaru key fobs and vehicle electronics. We can diagnose the issue, replace your key fob if necessary, and ensure it’s properly programmed to your vehicle.
Other Subaru Key Fob Types
While this guide focuses on the rectangular key fob common for the 2014 Subaru Impreza, Subaru has used other key fob designs over the years. These include:
- Teardrop Shape: Older Subaru models sometimes use a teardrop-shaped fob. Battery replacement is similar, but these typically use a CR2025 battery and do not have a removable emergency key.
- Exposed Metal Key with Buttons: The oldest style features an exposed metal key. These often have a secondary internal casing and use a CR1620 battery.
While the battery replacement process is generally similar across these types, always refer to your Subaru owner’s manual for the most accurate information regarding your specific key fob and battery type.
Conclusion
Replacing the battery in your 2014 Subaru Impreza key fob is a simple maintenance task that can save you time and hassle. By following these steps, you can likely get your key fob working again quickly. However, if you encounter any issues or prefer professional assistance, don’t hesitate to contact us at keyfobprog.com. We are here to help with all your Subaru key fob needs! Schedule a service appointment today and let our experienced technicians take care of it for you.
