Lost your 2015 Ford Key Fob or need a spare? Replacing a key fob through a dealership can be expensive. The good news is you can program a new or used key fob yourself, potentially saving you a significant amount of money. This guide provides a step-by-step process to program an intelligent access key fob for a 2015 Ford Edge, and may be applicable to other Ford models and remotes.
This procedure is designed for adding a spare key, so ensure you meet the prerequisites before you begin. It’s crucial to have two already programmed intelligent access keys to successfully program a new one.
Before You Begin: Essential Requirements
To program a new 2015 Ford key fob yourself, ensure you meet these requirements:
- Two Existing, Working Key Fobs: You must have two previously programmed intelligent access keys that function correctly with your vehicle. This is a security measure to prevent unauthorized key programming.
- New Unprogrammed Key Fob: Obtain a new, unprogrammed key fob or a used one that is compatible with your 2015 Ford. Crucially, check the FCC ID and part numbers on your original key fob and match them to the replacement you purchase. Pay attention to whether your vehicle has remote start, as there are different key fobs for models with and without this feature. Buying online from places like eBay can be cost-effective, but always verify compatibility before purchase.
- Vehicle in Park with Ignition OFF: Ensure your Ford is parked, the ignition is completely switched off, and all doors are closed and remain closed throughout the programming procedure.
- Patience and Precision: Timing is critical in this process. Read through all the steps carefully before you start, and be prepared to repeat the procedure if necessary. If you make a mistake or take too long, wait at least one minute before trying again.
Step-by-Step Programming Procedure
Follow these steps precisely and within the given timeframes to successfully program your 2015 Ford key fob:
-
Access the Backup Tray: Open the lid of your floor console storage compartment. Inside, you will find a backup tray designed to hold the key fob during programming.
-
First Programmed Key Insertion: Take one of your two working, previously programmed intelligent access keys. Orient the key fob with the buttons facing upwards and the key ring towards the rear of the vehicle. Place this key fob into the backup tray in the console storage.
-
Initiate Programming Sequence (First Key): Press and release the Start/Stop button on your Ford. Wait for five seconds. Then, press and release the Start/Stop button again. After this second press, remove the first intelligent access key from the backup tray.
-
Second Programmed Key Insertion: Within 10 seconds of removing the first key, take your second working, previously programmed intelligent access key. Place this key fob into the backup tray. Press and release the Start/Stop button. Wait for five seconds. Then, press and release the Start/Stop button again. Remove the second intelligent access key from the backup tray.
-
Program the New Key Fob: Wait five seconds after removing the second programmed key. Then, take your new, unprogrammed 2015 Ford key fob and place it into the backup tray. Press and release the Start/Stop button.
If the programming is successful, the doors of your Ford will lock automatically.
-
Test the New Key Fob: Press the unlock button on your newly programmed key fob. Verify that the remote control functions (lock, unlock, remote start if applicable) are working correctly. Finally, start your vehicle using the new intelligent access key to confirm that the programming is complete and successful.
Troubleshooting and Important Notes
- Timing is Crucial: The most common reason for programming failure is incorrect timing. Ensure you adhere to the specified wait times and 10-second window between steps. If you are unsuccessful on your first attempt, carefully reread the instructions and try again, paying close attention to timing.
- Maximum Keys: Keep in mind that you can program a maximum of four intelligent access keys to your 2015 Ford vehicle.
- Used Key Fobs: If you purchased a used key fob, ensure it is indeed unprogrammed or properly reset before attempting to program it to your vehicle.
- “MyKey” Feature: After successfully programming your new 2015 Ford key fob, you have the option to set it up as a “MyKey”. This feature allows you to program restrictions on vehicle usage, such as speed limits and audio volume, which can be useful if you lend your car to others. Consult your owner’s manual for instructions on setting up and using the “MyKey” feature.
By following these steps carefully, you should be able to successfully program a new 2015 Ford key fob and gain a functional spare without the expense of dealership programming costs.
