Lost your key fob or need to program a new one for your 2016 Ford F150? Programming your key fob yourself can save you time and money compared to dealership costs. This comprehensive guide provides step-by-step instructions for programming a 2016 Ford F150 key fob, covering both flip key and smart key systems. Whether you have a traditional flip key or the advanced smart key, we’ll walk you through the process to get you back on the road quickly.
Programming Your 2016 F150 Flip Key Fob
If your 2016 Ford F150 uses a flip key, follow these instructions. Remember, you’ll need two previously programmed keys to perform this DIY procedure. If you only have one working key, you may need professional equipment or consider renting a programmer designed for Ford vehicles.
Before you begin, ensure you have:
- Your 2016 Ford F150 flip key.
- Two already programmed, working keys for your vehicle.
- The new, unprogrammed key fob.
Programming Steps:
-
Insert and Turn First Programmed Key: Place your first working, programmed key into the ignition cylinder. Turn the ignition from the OFF position to the ON position. Keep it in the ON position for at least one second, but no longer than 10 seconds.
-
Turn Off and Remove First Key: Turn the ignition back to the OFF position and remove the first programmed key from the ignition.
-
Insert and Turn Second Programmed Key: Within 10 seconds of removing the first key (but wait at least 3 seconds), insert your second working, programmed key into the ignition. Turn the ignition from the OFF position to the ON position again. Maintain the ON position for at least one second, but no more than 10 seconds.
-
Turn Off and Remove Second Key: Turn the ignition back to the OFF position and remove the second programmed key from the ignition.
-
Insert New Key for Programming: Within 10 seconds of removing the second programmed key (but wait at least 3 seconds), insert the new, unprogrammed key into the ignition. Turn the ignition from the OFF position to the ON position. Keep it in the ON position for at least one second, but no more than 10 seconds. This action initiates the programming sequence for your new key.
-
Verify Programming: If the programming is successful, the new key should now start your 2016 Ford F150 and the remote functions should operate correctly.
-
Program Additional Keys (Optional): To program more new, unprogrammed keys, simply repeat steps 1 through 5 for each additional key. A maximum of eight keys can be programmed to your 2016 Ford F150.
Programming Your 2016 F150 Smart Key Fob (Intelligent Access Key)
For 2016 Ford F150 models equipped with the smart key system, also known as Intelligent Access keys, use the following programming steps. You will need two previously programmed intelligent access keys inside the vehicle to proceed with this method.
Before you begin, ensure:
- Your 2016 Ford F150 smart key (Intelligent Access key).
- Two previously programmed, working Intelligent Access keys are inside the vehicle with you.
- The new, unprogrammed Intelligent Access key is readily available.
- All vehicle doors are closed and remain closed throughout the process.
- The vehicle is completely OFF before starting.
Programming Steps:
-
Insert First Programmed Key and Press Ignition: Place your first programmed Intelligent Access key into the backup slot located in the center console. Press the push-button ignition switch. This turns the ignition to the ON position.
-
Wait and Press Ignition Again: Wait for five seconds. Then, press the push-button ignition switch again. This should switch the ignition from OFF to ON. Keep the ignition in the ON position for at least three seconds, but no more than 10 seconds.
-
Remove First Key: Remove the first Intelligent Access key from the backup slot. The ignition should switch OFF.
-
Insert Second Programmed Key and Press Ignition: Within 10 seconds of removing the first key, place your second programmed Intelligent Access key into the backup slot. Press the push-button ignition switch.
-
Wait and Press Ignition Again (Second Key): Wait for five seconds. Then, press the push-button ignition switch again. This should switch the ignition from OFF to ON. Keep the ignition ON for at least three seconds, but no more than 10 seconds.
-
Remove Second Key: Remove the second Intelligent Access key from the backup slot. The ignition should switch OFF.
-
Insert New Key for Programming and Press Ignition: Place the new, unprogrammed Intelligent Access key into the backup slot. Press the push-button ignition switch. This should initiate the programming sequence for the new smart key.
-
Verify Programming: Programming is now complete. Test the remote control functions on the new Intelligent Access key and ensure your 2016 Ford F150 starts with the new key.
-
Repeat if Unsuccessful: If the programming was not successful, wait for 10 seconds and carefully repeat steps 1 through 7. Ensure you are performing each step within the specified time limits.
By following these instructions, you should be able to successfully program your 2016 Ford F150 key fob. If you encounter difficulties or do not have two previously programmed keys, consider consulting a qualified locksmith for assistance. Find a Locksmith Near You
