Having a spare key fob for your 2016 Ford F250 is not just a convenience, it’s a necessity. Whether you’ve misplaced your original or simply want a backup, programming a new key fob might seem daunting. But the good news is, if you have two existing, programmed keys, you can easily program a new one yourself right at home. This guide will walk you through the process, ensuring you can get back on the road with confidence.
To begin, it’s important to understand the type of key fob your 2016 F250 uses. These are integrated keyhead transmitters (IKT), meaning the key and remote are combined into one unit. Programming these keys is straightforward and also automatically programs the remote start and door lock functions simultaneously. You won’t need separate procedures for each function, simplifying the entire process.
The method we’ll outline here is for programming a spare key when you already have two working keys. Ford’s SecuriLock system allows for owner programming under these conditions. If you don’t have two existing keys, or if this procedure doesn’t work for you, you will need to visit an authorized Ford dealer or a qualified locksmith for assistance. Keep in mind that your 2016 F250 can accommodate up to eight programmed keys, but only four of these can be integrated keyhead transmitters.
Before you start, make sure you have all necessary items at hand:
- Your 2016 Ford F250 vehicle.
- Two previously programmed, working keys for your F250.
- The new, unprogrammed key fob you wish to program.
Once you have everything ready, follow these steps precisely:
-
Insert the first programmed key into the ignition.
-
Turn the ignition from OFF to ON. Leave it in the ON position for at least three seconds, but no longer than ten seconds.
-
Turn the ignition OFF and remove the first key.
-
Within ten seconds of turning the ignition OFF and removing the first key, insert the second programmed key into the ignition.
-
Turn the ignition from OFF to ON again. Keep it ON for at least three seconds, but no more than ten seconds.
-
Turn the ignition OFF and remove the second key.
-
Again, within ten seconds of turning the ignition OFF and removing the second programmed key, insert the new, unprogrammed key into the ignition.
-
Turn the ignition from OFF to ON. This time, keep it in the ON position for at least six seconds. You should hear the door locks cycle, indicating successful programming.
-
Turn the ignition OFF and remove the newly programmed key.
Now, test the new key. Start your 2016 F250 to confirm the engine immobilizer is programmed. If it starts, then that part is successful. If your new key is an integrated keyhead transmitter, test the remote entry system functions (door locks, remote start). They should now be working.
If the programming was unsuccessful, don’t worry immediately. Wait for about 20 seconds and carefully repeat steps 1 through 8. It’s crucial to adhere to the timing windows in each step. If you still can’t program the key fob after a few attempts, it’s best to take your 2016 Ford F250 to an authorized Ford dealership or a professional automotive locksmith. They have specialized equipment and expertise to handle key programming in cases where DIY methods aren’t sufficient.
Programming your 2016 F250 Key Fob at home is a convenient way to save time and money. By following these steps carefully, you can quickly get your new key up and running, ensuring you always have a spare available when you need it.
