Program Your 2016 Ford F-150 Key Fob with Push Button Start

Having trouble with your 2016 Ford F-150 key fob? Need to program a new one for your push-button start system? You’re in the right place. This guide provides step-by-step instructions to program your key fob yourself, saving you time and money. For 2016 Ford F-150 models equipped with a push-button start and smart key system, programming a new key fob can be done at home if you have two already working keys. Let’s get started.

Programming Instructions for Smart Key System (Push Button Start)

These instructions are specifically for 2016 Ford F-150 models that use the intelligent access key system, also known as the smart key system, with push-button start. Before you begin, ensure you have two previously programmed and functioning intelligent access keys inside your vehicle and your new, unprogrammed key fob ready. Keep all doors closed throughout this process and perform each step within 30 seconds of the previous one. If you make a mistake, wait at least one minute before restarting.

Here’s how to program your 2016 Ford F-150 smart key fob:

1. Initiate Programming Mode with First Key: Place your first programmed intelligent access key into the backup slot located in your center console. Press the push-button ignition switch to turn the ignition ON.

2. Confirm First Key Recognition: Wait for five seconds. Then, press the push-button ignition switch again to turn the ignition OFF, then immediately back to the ON position. Keep the ignition in the ON position for at least three, but no more than ten seconds.

3. Prepare for Second Key: Remove the first intelligent access key from the backup slot. The ignition should now be OFF.

4. Initiate Programming with Second Key: Within ten seconds of removing the first key, place your second programmed intelligent access key into the backup slot in the center console. Press the push-button ignition switch to turn the ignition ON.

5. Confirm Second Key Recognition: Wait for five seconds. Then, press the push-button ignition switch again to turn the ignition OFF, then immediately back to the ON position. Keep the ignition in the ON position for at least three, but no more than ten seconds.

6. Enter New Key Programming: Remove the second intelligent access key from the backup slot. The ignition should now be OFF.

7. Program New Key Fob: Place your new, unprogrammed intelligent access key into the backup slot. Press the push-button ignition switch to turn the ignition ON.

Alt text: Close-up of a Ford F-150 center console highlighting the key fob backup slot, used for programming a new 2016 key fob.

Programming Completion and Verification

Your new 2016 Ford F-150 key fob should now be programmed. To verify successful programming, check if:

• The remote control functions (lock, unlock, panic) are working correctly.
• You can start your Ford F-150 engine using the new intelligent access key.

If the programming was unsuccessful, wait for ten seconds and carefully repeat steps 1 through 7. Ensure you are using two previously programmed keys and following each step precisely within the time limits.

What if I Only Have One Programmed Key?

If you only have one programmed key fob for your 2016 Ford F-150, or if you are having trouble with the DIY programming method, you have a few options:

• Dealership Programming: Ford dealerships have the diagnostic tools necessary to program key fobs even without existing programmed keys. This is generally the most reliable but also the most expensive option.
• Professional Locksmith Services: Automotive locksmiths are often a more affordable alternative to dealerships. Many locksmiths have mobile services and can come to your location to program your key fob. Click Here to Locate A Locksmith in your area.
• Programmer Rental: For DIY enthusiasts comfortable with using programming tools, renting a key fob programmer might be an option. These devices can bypass the need for two existing keys. Rent a Programmer Here.

Important Notes:

• A maximum of eight keys can be programmed to your 2016 Ford F-150.
• These instructions are specifically for the smart key system with push-button start. For models with a flip key system, different instructions apply (see below).
• Always read and fully understand the procedure before you begin programming.

Programming Instructions for Flip Key System

If your 2016 Ford F-150 uses a flip key system instead of a smart key with push-button start, these are the instructions you will need. This method also requires two previously programmed keys.

1. Insert First Programmed Key and Turn Ignition ON: Insert your first previously programmed key into the ignition. Turn the ignition from the OFF to the ON position. Keep the ignition in the ON position for at least one second, but no more than ten seconds.

2. Turn Ignition OFF and Remove First Key: Turn the ignition from the ON position back to the OFF position. Remove the first programmed key from the ignition.

3. Insert Second Programmed Key and Turn Ignition ON: After three seconds, but within ten seconds of removing the first key, insert your second previously programmed key into the ignition. Turn the ignition from OFF to ON. Again, keep it ON for at least one to ten seconds.

4. Turn Ignition OFF and Remove Second Key: Turn the ignition from the ON position back to the OFF position and remove the second programmed key.

5. Insert New Key and Turn Ignition ON: After three seconds, but within ten seconds of removing the second key, insert your new, unprogrammed key into the ignition. Turn the ignition from OFF to ON. Keep it ON for at least one to ten seconds. This step programs your new key.

Alt text: Ignition switch of a 2016 Ford F-150 with a flip key inserted, illustrating the programming process for this key type.

6. Program Additional Keys (Optional): To program more new unprogrammed keys, simply repeat steps 1 through 5.

Verification for Flip Key System

Confirm that the new key(s) are successfully programmed by:

• Starting your Ford F-150 engine with the new key.
• Testing the remote functions (lock/unlock/panic) if your flip key has remote features.

By following these instructions, you should be able to program your 2016 Ford F-150 key fob, whether you have the push-button start smart key system or the flip key system. Remember to be precise with each step and seek professional help if needed.