So, you need a spare key fob for your 2017 Ford Fusion? Losing a key or simply wanting an extra one is a common situation. The good news is you don’t always have to run to the dealership and spend a fortune to get a new key programmed. If you already have two working programmed keys, you can actually program additional key fobs yourself right at home. This guide will walk you through the exact steps to program a new key fob for your 2017 Ford Fusion, saving you time and money.
Before you begin, it’s crucial to ensure you have everything you need. This process is specifically for adding spare keys, meaning you must already possess two functioning, programmed intelligent access keys for your 2017 Ford Fusion. You’ll also need the new, unprogrammed intelligent access key fob that you intend to program. These new key fobs can often be purchased online from reputable sources, like eBay, often at a significant discount compared to dealership prices. Make sure the new key is indeed compatible with your 2017 Ford Fusion.
Let’s dive into the programming procedure. It’s essential to follow these steps precisely and within the given timeframes to ensure success. Make sure your Ford Fusion is turned off, all doors are closed, and remain closed throughout the entire process. It’s also recommended to read through all the instructions completely before you start. If you make a mistake or step out of sequence, you’ll need to wait at least one minute before trying again. Speed and accuracy are key here, but don’t rush to the point of making errors.
Here are the steps for programming your 2017 Ford Fusion key fob:
-
Prepare the Keys and Cup Holder: Begin by removing the mechanical key blade from both of your existing, programmed key fobs and also from the new key fob. Next, locate the cup holder in your center console and remove the rubber liner at the bottom to expose the backup slot.
-
Insert the First Programmed Key: Take one of your programmed intelligent access key fobs. Orient it with the buttons facing upwards and the unlock button pointing towards the front of your vehicle. Carefully place this key fob into the backup slot within the cup holder.
-
Ignition Press (First Key): Make absolutely sure your foot is off the brake pedal. Press the push-button ignition switch to turn the vehicle on.
-
Ignition Off (First Key): Wait for five full seconds, and then press the push-button ignition switch again to turn the vehicle completely off.
-
Remove the First Key: Take the first programmed intelligent access key fob out of the backup slot.
-
Insert the Second Programmed Key: Within ten seconds of removing the first key, take your second programmed intelligent access key fob and place it into the backup slot, again with the buttons facing up and the unlock button forward. Press the push-button ignition switch.
-
Ignition Off (Second Key): Wait another five seconds, and then press the push-button ignition switch once more to turn the vehicle off.
-
Remove the Second Key: Take the second programmed intelligent access key fob out of the backup slot.
-
Insert the New Key: Wait for five seconds after removing the second programmed key. Then, take your new, unprogrammed intelligent access key fob and place it into the backup slot, in the same orientation as before. Press the push-button ignition switch.
-
Confirmation: Within a few seconds of pressing the ignition with the new key fob in place, you should observe the hazard lights flashing twice. You will also likely hear the doors lock and then unlock. These are the confirmation signals that the new key fob has been successfully programmed to your 2017 Ford Fusion.
Alt text: 2017 Ford Fusion cup holder with rubber liner removed, showing the key fob backup slot (B) and rubber covering (A).
Once you see the hazard lights and hear the door locks, the programming process is complete. To verify, remove the new key fob from the backup slot and test its functionality. Ensure that the remote control buttons (lock, unlock, panic, and remote start if equipped) operate correctly. Most importantly, try starting your 2017 Ford Fusion with the newly programmed intelligent access key. If the vehicle starts, you have successfully programmed your new key fob!
If you intend to program a fourth key fob, you can simply repeat this entire process again from the beginning.
In the event that the programming is unsuccessful on your first attempt, don’t panic. Wait for about ten seconds, and then carefully repeat steps 1 through 7. It’s common for users to need a couple of tries to get the timing just right. However, if you have attempted the procedure multiple times and are still unable to program the key fob, it might be necessary to take your 2017 Ford Fusion to an authorized Ford dealership for professional programming. While programming it yourself is convenient and cost-effective, sometimes professional equipment or assistance is required. Enjoy the convenience of your newly programmed key fob!
