CR2032 Battery for 2017 Subaru Outback Key Fob

2017 Subaru Outback Key Fob Battery Size: A Comprehensive Guide

Knowing the correct 2017 Subaru Outback Key Fob Battery Size is crucial for maintaining convenient access to your vehicle. This guide will walk you through everything you need to know, from identifying the correct battery type to replacing it yourself. We’ll also cover common issues and troubleshooting tips.

What Battery Does a 2017 Subaru Outback Key Fob Use?

Your 2017 Subaru Outback key fob uses a CR2032 battery. This is a common coin cell battery readily available at most stores that sell batteries. It’s a 3-volt lithium battery known for its small size and long lifespan.

Why is Knowing the Right 2017 Subaru Outback Key Fob Battery Size Important?

Using the incorrect battery size can lead to a poor connection, preventing your key fob from functioning properly. It could even damage the key fob itself. Knowing the right size ensures a snug fit and optimal performance.

CR2032 Battery for 2017 Subaru Outback Key FobCR2032 Battery for 2017 Subaru Outback Key Fob

How to Replace Your 2017 Subaru Outback Key Fob Battery

Replacing the battery in your 2017 Subaru Outback key fob is a simple process you can do yourself. Here’s a step-by-step guide:

  1. Locate the release button: This is usually a small button or switch on the back or side of your key fob.
  2. Release the key: Press the release button and gently slide the emergency key blade out of the fob.
  3. Open the fob: Use the emergency key blade or a small flathead screwdriver to carefully pry open the key fob casing. Be gentle to avoid breaking any plastic clips.
  4. Remove the old battery: Gently pry out the old CR2032 battery. Avoid using excessive force.
  5. Insert the new battery: Place the new CR2032 battery into the compartment, ensuring the positive (+) side is facing up.
  6. Close the fob: Snap the two halves of the key fob back together.
  7. Reinsert the key: Slide the emergency key blade back into its slot.
  8. Test the fob: Try locking and unlocking your car to ensure the new battery is working correctly.

Troubleshooting Your 2017 Subaru Outback Key Fob

Sometimes, even with a new battery, your key fob might not work. Here are some common issues and solutions:

  • Key Fob Not Responding: Try holding the key fob closer to the car when pressing the buttons. If this doesn’t work, try reprogramming the key fob.
  • Key Fob Intermittently Working: This could be due to a weak battery or a loose connection. Check the battery contacts for corrosion and clean them if necessary.
  • Key Fob Needs Reprogramming: If the key fob still doesn’t work after replacing the battery, it may need to be reprogrammed. You can often do this yourself by following the instructions in your owner’s manual, or you can take it to a Subaru dealership or qualified locksmith.

“A common mistake people make is using the wrong battery type,” says John Davis, a certified automotive locksmith with over 20 years of experience. “Always double-check that you are using a CR2032 battery for your 2017 Subaru Outback key fob.”

Maintaining Your 2017 Subaru Outback Key Fob

Proper maintenance can extend the life of your key fob and its battery. Avoid exposing your key fob to extreme temperatures or moisture. Keep it clean and dry.

Maintaining Your 2017 Subaru Outback Key FobMaintaining Your 2017 Subaru Outback Key Fob

“Regularly cleaning the battery contacts can prevent corrosion and ensure a good connection,” adds Davis. He recommends using a cotton swab and isopropyl alcohol to clean the contacts.

Conclusion

Knowing the 2017 Subaru Outback key fob battery size and how to replace it is essential for every owner. By following the steps outlined in this guide, you can quickly and easily replace the battery yourself, saving time and money. Remember to always use the correct CR2032 battery and maintain your key fob for optimal performance.

FAQ

  1. What type of battery does the 2017 Subaru Outback key fob use? A CR2032 battery.
  2. How often should I replace my key fob battery? Every 2-3 years, depending on usage.
  3. Can I replace the battery myself? Yes, it’s a simple process.
  4. What if my key fob doesn’t work after replacing the battery? Try reprogramming the key fob or check the battery contacts for corrosion.
  5. Where can I buy a CR2032 battery? Most stores that sell batteries, including grocery stores, pharmacies, and electronics stores.
  6. What should I do if my key fob gets wet? Dry it thoroughly as soon as possible and try replacing the battery.
  7. How do I reprogram my key fob? Refer to your owner’s manual or consult a Subaru dealership or locksmith.

Other Helpful Resources

Need help? Contact us via Whatsapp: +1 (641) 206-8880 or visit us at 1326 N Houston St, Amarillo, TX 79107, USA. Our customer service team is available 24/7.


Posted

in

by

Tags:

Comments

Leave a Reply

Your email address will not be published. Required fields are marked *